Read Sharp PN-S525 (serv.man3) Service Manual online
PN-S525
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
1. CONNECTION
1-1. CONNECTING PERIPHERAL EQUIPMENT
Caution:
• Be sure to turn off the main power switch and disconnect the plug
from the power outlet before connecting/disconnecting cables.
Also, read the manual of the equipment to be connected.
Also, read the manual of the equipment to be connected.
• Be careful not to mix up the input terminal with the output terminal
when connecting cables. Mixing up the input and output terminals
may cause malfunctions and the other problems.
may cause malfunctions and the other problems.
(1) Connection with a PC
• Use a commercially available signal cable (DVI-D 24 pin) for the PC1
input terminal. Set DVI SELECT of INPUT SELECT on the OPTION
menu to PC1 DVI-D when using the PC1 input terminal.
• Use a commercially available HDMI cable (conforming to the HDMI
standard) for the PC2 input terminal. Set HDMI SELECT of INPUT
SELECT on the OPTION menu to PC2 HDMI when using the PC2
input terminal. In addition, select the audio input terminal to be used
in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu.
in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu.
When DIGITAL is selected, connection to the PC audio input terminal
is unnecessary.
• Use a commercially available signal cable (Mini D-sub 15 pin) for the
PC3 input terminal.
• Use a commercially available signal cable (BNC) for the PC4 input
terminals. Set BNC SELECT of INPUT SELECT on the OPTION
menu to PC4 RGB when using the PC4 input terminals.
• Use a commercially available audio cable (mini stereo jack) for the
PC audio input terminal. Use an audio cable without resistance.
Note:
• Images may not be displayed properly depending on the computer
(graphics board) to be connected.
• A screen with 1920
×
1080 resolution may not be displayed cor-
rectly on PC4. In this case, check the settings of your computer
(graphics board) to verify that input signals conform to specifica-
(graphics board) to verify that input signals conform to specifica-
tions of this monitor.
• If there is a check box to disable EDID in display control panel,
check it when using PC4.
• Use the automatic screen adjustment when a PC screen is dis-
played for the first time using PC3 or PC4, or when the setting of
the PC is changed.
• The screen is adjusted automatically when SELF ADJUST in the
OPTION menu is set to “ON”.
(2) Connection with AV equipment
• Use a commercially available signal cable (DVI-D 24 pin) for the AV1
input terminal. Set DVI SELECT of INPUT on the OPTION menu to
AV1 (DVI-D) when using the AV1 input terminal.
• Use a commercially available HDMI cable (conforming to the HDMI
standard) for the AV2 input terminal. Set HDMI SELECT of INPUT
SELECT on the OPTION menu to AV2 HDMI when using the AV2
input terminal. In addition, select the audio input terminal to be used
in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu.
When DIGITAL is selected, connection to the AV audio input terminal
is unnecessary.
• Use a commercially available component cable (BNC) for the AV3
input terminals. Set BNC SELECT of INPUT SELECT on the
OPTION menu to AV3 COMPONENT when using the AV3 input ter-
minals.
• Use a commercially available S-video cable for the AV4 input termi-
nal.
• Use a commercially available video cable (BNC) for the AV5 input ter-
minal.
• Use a commercially available audio cable (RCA) for the AV audio
input terminals.
• The AV1/AV2 input terminals are compatible with the video signals
below:
1920
×
1080p @ 50/59.94/60Hz
1920
×
1080i @ 50/59.94/60Hz
1280
×
720p @ 50/59.94/60Hz
720
×
576p @ 50Hz
720
×
480p @ 59.94/60Hz
640
×
480p @ 59.94/60Hz
• The AV2 input terminals are compatible with the video signals below:
1920
×
1080p @ 24Hz
720 (1440)
×
576i @ 50Hz
720 (1440)
×
480i @ 59.94/60Hz
• The AV3 input terminals are compatible with the video signals below:
1080p @50/60Hz, 1080i @50/60Hz, 720p @50/60Hz,
576p @50Hz, 576i @50Hz, 480p @60Hz, 480i @60Hz
V
id
e
o i
npu
t
PC1 input terminal
PC2 input terminal
PC3 input terminal
PC4 input terminals
A
udi
o inp
u
t
PC audio input terminal
H
V
R
G
B
V
ide
o
i
npu
t
AV1 input
terminal
AV2 input
terminals
AV3 input
terminals
AV4 input terminal
AV5 input terminal
A
u
di
o i
n
p
u
t
AV audio input terminals
Cr/Pr
Y
Cb/Pb
Click on the first or last page to see other PN-S525 (serv.man3) service manuals if exist.