Read Sharp PN-R903 (serv.man5) Service Manual online
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-R903/R703/R603
INSTALLATION, ADJUSTMENT, SETTING
2 – 4
MEMO
n
Images may not be displayed properly depending on the computer (video card) to be connected.
n
If there is a check box to disable EDID in display control panel, check it when using “PC RGB”.
n
Use the automatic screen adjustment when a PC screen is displayed for the first time using “PC D-SUB” or “PC RGB”, or when the setting of
the PC is changed. The screen is adjusted automatically when “SELF ADJUST” in the OPTION menu is set to “ON”.
the PC is changed. The screen is adjusted automatically when “SELF ADJUST” in the OPTION menu is set to “ON”.
n
If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear delayed
from the audio portion.
Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the monitor’s
audio output to the speakers or other devices.
from the audio portion.
Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the monitor’s
audio output to the speakers or other devices.
n
The audio input terminals used in each input mode are factory-set as follows.
Input mode
Audio input terminal (Factory setting)
DVI-I
Audio 1 input jack
Display Port
Display Port input jack
HDMI1[PC],HDMI1[AV]
HDMI2[PC],HDMI2[AV]
PC/AV HDMI input jack
D-SUB[RGB]
D-SUB[COMPONENT]
D-SUB[VIDEO]
Audio 2 input jack
Click on the first or last page to see other PN-R903 (serv.man5) service manuals if exist.