PN-R903 (serv.man5) - Sharp Monitor Service Manual (repair manual). Page 16

PN-R903/R703/R603　

 2 – 1

owo yameta

n

This product is for use indoors.

n

Since the monitor is heavy, consult your dealer before installing,
removing or moving the monitor.

n

When installing, removing or moving the monitor, ensure that this
is carried out by at least 2 people. (R703/R603)

n

When installing, removing or moving the monitor, ensure that this
is carried out by at least 4 people. (PN-R903)

n

A mounting bracket compliant with VESA specifications is required.
Do not use any screw holes other than VESA holes for installation.

n

To attach a VESA-compliant mounting bracket, use M6 screws
that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.

n

When moving the monitor, please have a place in the figure
below.(PN-R703/R603)

n

When moving the monitor, please have a handle.(PN-R903)

n

Use the monitor with the surface perpendicular to a level surface.
If necessary, the monitor may be tilted up to 20 degrees upward
or downward.

n

Mounting the monitor on the wall requires special expertise and
the work must be performed by an authorized SHARP dealer.
You should never attempt to perform any of this work yourself.
Our company will bear no responsibility for accidents or injuries
caused by improper mounting or mishandling.

n

This monitor should be used at an ambient temperature between
32°F (0°C) and 104°F (40°C). Provide enough space around the

monitor to prevent heat from accumulating inside.

*

1 This monitor can be installed close to a wall. However, as the 

monitor emits heat during operation, please be aware that this 
heat may discolor or alter the wall.

Horizontal installation

Vertical installation

ᲢcmᲣ

0.7

è

è

PN-R603

PN-R903

5