Read Sharp PN-R903 (serv.man5) Service Manual online
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-R903/R703/R603
INSTALLATION, ADJUSTMENT, SETTING
2 – 2
n
TIf it is difficult to provide sufficient space for any reason such as
the installation of the monitor inside a housing, or if the ambient
temperature may be outside of the range of 32°F (0°C) to 104°F
(40°C), install a fan or take other measures to keep the ambient
temperature within the required range.
the installation of the monitor inside a housing, or if the ambient
temperature may be outside of the range of 32°F (0°C) to 104°F
(40°C), install a fan or take other measures to keep the ambient
temperature within the required range.
n
Temperature condition may change when using the display
together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified
by the optional equipments.
together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified
by the optional equipments.
n
Do not block any ventilation openings. If the temperature inside
the monitor rises, this could lead to a malfunction.
the monitor rises, this could lead to a malfunction.
n
After mounting, please carefully ensure the monitor is secure,
and not able to come loose from the wall or mount.
and not able to come loose from the wall or mount.
n
Do not place the monitor on a device which generates heat.
n
Adhere to the following when installing the monitor in its portrait
orientation. Failing to adhere to the following may cause malfunc-
tions.
--- Install the monitor such that the power LED is located on the
orientation. Failing to adhere to the following may cause malfunc-
tions.
--- Install the monitor such that the power LED is located on the
bottom side.
--- Set the MONITOR on the SETUP menu to PORTRAIT.
--- Be sure to clamp the power cord (supplied) onto the cable
--- Be sure to clamp the power cord (supplied) onto the cable
clamp attachment using the supplied cable clamp. When
clamping the power cord, take care not to stress the terminal
of the power cord. Do not bend the power cord excessively.
clamping the power cord, take care not to stress the terminal
of the power cord. Do not bend the power cord excessively.
n
Use the supplied vertical sticker when you install the monitor in
portrait orientation.
portrait orientation.
Do not remove the factory-affixed sticker but affix the logo sticker
over it. Be careful not to cover the remote control sensor or buttons.
over it. Be careful not to cover the remote control sensor or buttons.
n
Be sure to use a wall-mount bracket designed or designated for
mounting the monitor.
mounting the monitor.
n
This monitor is designed to be installed on a concrete wall or pil-
lar. Reinforced work might be necessary for some materials such
as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can
endure at least 4 times or more the weight of the monitor. Install
by the most suitable method for the material and the structure.
lar. Reinforced work might be necessary for some materials such
as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can
endure at least 4 times or more the weight of the monitor. Install
by the most suitable method for the material and the structure.
n
This monitor is fixed to the temporary stand used in the package
for transportation when shipped from the factory. Please note
that this stand is for temporary use only until the monitor is prop-
erly mounted. (PN-R903)
for transportation when shipped from the factory. Please note
that this stand is for temporary use only until the monitor is prop-
erly mounted. (PN-R903)
Cable clamp
Hold point
3RZHUFRUG
315
315
Logo
Operation panel
Blank seal
Operation panel
Logo
Click on the first or last page to see other PN-R903 (serv.man5) service manuals if exist.