Read Sharp XL-MP8H User Guide / Operation Manual online
This Quick Start Guide will help you to correctly install and oper-
ate your system.
ate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
0301
1
Accessories
2
Remote control battery installation
1
Remove the battery cover.
2
Insert the batteries as shown.
3
Replace the cover.
Remote control
× 1
FM/AM loop aerial
× 1
Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Batteries are not included.
TINSZA057SJZZ
05F N YA 1
05F N YA 1
AC power lead
× 1
MODEL
XL-MP8H
MICRO COMPONENT SYSTEM
3
System connections
Plain
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
White line
Right speaker
Left speaker
AM loop aerial
FM aerial
Plug adaptor
× 1
XLMP8HE_QG.pm
05.6.14, 11:56 AM
1
Listening to a disc
1
Press the FUNCTION button until “NO DISC” appears on
the display.
the display.
2
Insert a disc into the disc slot with
the label side right direction.
the label side right direction.
3
Press the
button to start playback from track 1.
Listening to the radio
1
Press the FUNCTION button until “FM” or “AM” appears on
the display.
the display.
2
Press the TUNING (
or
) button to tune in to the desired
station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the FUNCTION button to display the “ST” indicator.
Press the FUNCTION button to display the “ST” indicator.
● “ ” will appear when an FM broadcast is in stereo.
■
If trouble occurs
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on
1. Set the unit to the stand-by mode and turn the power on
again.
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
by resetting it.
■
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-
by mode.
2. Whilst pressing down the FUNCTION button and the
CLEAR button, press the ON/STAND-BY button until “CL”
appears.
appears.
Caution:
■
Maintenance
Routine maintenance is required for continued optimum perfor-
mance. Refer to the operation manual.
mance. Refer to the operation manual.
FM stereo mode indicator
FM stereo receiving indicator
TINSZA057SJZZ
4
Press the ON/STAND-BY button to turn the power on.
XLMP8HE_QG.pm
05.6.14, 11:57 AM
2
Display
