Read Sharp PN-E802 (serv.man3) Service Manual online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-E802/E702/E602 DISASSEMBLY AND ASSEMBLY
6 – 22
2 ) Disconnect four connectors, remove one screw
A (M4 x 6 SW+W, Silver), and remove the AC switch. Remove two screws B (M3 x 8 counter-
sunk, Black), and remove the AC inlet cable.
CAUTION
SCREW TIGHTENING TORQUE
n
Screw
A: 0.9 - 1.1N•m
n
Screw
B: 0.7 - 0.9N•m
■ PN-E702/E602
1 ) Disconnect four connectors, remove one screw
A (M4 x 6, Silver), and remove the AC switch. Remove two screws B (M3 x 6 countersunk,
Black), and remove the AC inlet cable.
CAUTION
SCREW TIGHTENING TORQUE
n
Screw
A: 0.9 - 1.1N•m
n
Screw
B: 0.7 - 0.9N•m
Confirm that the circle (
o
) is on
the left side and it is in the OFF.
When attaching, ensure that the terminals are
oriented as indicated in the engraved mark.
oriented as indicated in the engraved mark.
Mark
Blue
Black
White
A x 1
Screw
White
AC switch
AC inlet cable
B x 2
Screw
A
Screw
x 1
Black
White
White
Blue
Confirm that the circle
(o) is on the left side
and it is in the OFF
(o) is on the left side
and it is in the OFF
Screw x 2
AC Inlet Cable
AC Switch
Mark
When attaching, ensure that the
terminals are oriented as
indicated in the engraved mark.
terminals are oriented as
indicated in the engraved mark.
Click on the first or last page to see other PN-E802 (serv.man3) service manuals if exist.