Read Sharp PN-E802 (serv.man3) Service Manual online
CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-E802/E702/E602 DISASSEMBLY AND ASSEMBLY
6 – 18
6. LED INTERFACE PWB (PN-E802 ONLY)
1 ) Disconnect four connectors, remove two screws (M3 x 6 SW+W, Silver), and remove the LED interface PWB.
CAUTION
SCREW TIGHTENING TORQUE
n
0.55 - 0.65N•m
7. MAIN DC POWER SUPPLY UNIT
■ PN-E802
1 ) Disconnect four connectors, remove six screws (M3 x 6 SW+W, Silver), remove two hex spacers, and remove the main DC power supply unit.
CAUTION
NOTE FOR ASSEMBLY
n
Fix the screws and the hex spacers in the sequence of 1
323334, then fix the other screws.
SCREW TIGHTENING TORQUE
n
Screw: 0.55 - 0.65N•m
n
Hex spacer: 0.7 - 0.9N•m
Connector x 4
Screw x 2
1
4
3
2
1
Screw x 6
Connector x 4
Hex spacer x 2
Click on the first or last page to see other PN-E802 (serv.man3) service manuals if exist.