Read Sharp PN-A601 (serv.man3) Service Manual online
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-A601 INSTALLATION, ADJUSTMENT, SETTING
2 – 4
<PC/AV DVI-D OUTPUT TERMINAL>
n
The video of the PC/AV DVI-D input can be output to an external
device.
n
Outputting HDCP-encrypted video requires an external device which
supports HDCP.
n
This terminal allows the daisy chain connection of up to 5 monitors.
MEMO
n
The length of the signal cables or surrounding environment may
affect the image quality.
n
The screen may not display properly when using terminals other
than “PC DVI-D”/“AV DVI-D” for the input mode. In this case, turn
off the power to all the monitors connected in a daisy chain and
off the power to all the monitors connected in a daisy chain and
then turn the power on again.
n
When connecting monitors in a daisy chain set “AUTO INPUT
CHANGE” to “OFF”.
n
Video output is disabled in the following cases.
---When the input mode is “PC HDMI”/“AV HDMI”.
---When the input mode is “PC HDMI”/“AV HDMI”.
---When PIP SOURCE of the PIP/PbyP menu is set to PC
“HDMI” or “AV HDMI”.
---When the power is turned “off”.
---When the monitor is in input signal waiting mode.
<EXTERNAL SPEAKER TERMINALS>
Be sure to use external speakers with an impedance of 6
Ω and a rated
input of at least 10 W.
1 ) Attach a speaker cable core (included with the PN-ZB01) to the
end of the speaker cable connected to the monitor.
2 ) While pushing the tab, insert the tip of the cable.
3 ) Release the tab.
CAUTION
n
Be sure to connect the + and - terminals and the left and right
speakers properly.
n
Avoid short circuiting the + and - terminals.
First monitor
Second monitor
Digital signal (DVI) cables
(commercially available)
(commercially available)
To PC digital RGB output terminal
shows the signal flow
PC/AV DVI-D
output terminal
output terminal
PC/AV DVI-D
input terminals
input terminals
PC/AV DVI-D
output terminals
output terminals
Example
Approx.
3-15/16 inch
(10 cm)
3-15/16 inch
(10 cm)
Click on the first or last page to see other PN-A601 (serv.man3) service manuals if exist.