Read Sharp PN-A601 (serv.man3) Service Manual online
CHAPTER 2. INSTALLATION, ADJUSTMENT, SETTING
PN-A601 INSTALLATION, ADJUSTMENT, SETTING
2 – 6
■ CONTROLLING THE MONITOR WITH A PC
(LAN)
When the PN-ZB01 (optionel) is a attached, your monitor can be con-
nected to a LAN allowing you to control it from a PC on the LAN.
You can also configure the monitor to send e-mail notification when it
has a problem.
has a problem.
The connection requires a commercially available LAN cable (UTP
cable, Category 5, straight through).
MEMO
n
Your PC must be installed with Internet Explorer (version 7.0 or
later).
n
To control the monitor via LAN, set RS-232C/LAN SELECT to
LAN.
n
You cannot use RS-232C and LAN control simultaneously.
CAUTION
INITIALIZING PERSONAL INFORMATION
n
When the PN-ZB01 (optional) is attached, personal information
such as e-mail addresses can be registered in the monitor.
such as e-mail addresses can be registered in the monitor.
Before transferring or disposing of the monitor, initialize all set-
tings by selecting “ALL RESET1”. Note that “ALL RESET2” will
not initialize e-mail addresses and other settings.
not initialize e-mail addresses and other settings.
1 - 2.
CONNECTING THE POWER CORD
CAUTION
n
Do not use a power cord other than the one supplied with the
monitor.
1 ) Turn off the main power switch.
2 ) Plug the power cord (supplied) into the AC input terminal.
3 ) Plug the power cord (supplied) into the AC power outlet.
1 - 3. BINDING CABLES
The cables connected to the terminals on the rear of the monitor can be
fastened with the supplied cable clamp.
Insert the cable clamp into the cable clamp attachment on the rear of
the monitor and fasten the cables.
the monitor and fasten the cables.
Hub
LAN terminal
LAN cable (commercially available, straight)
Network (LAN)
1
2
3
Main power
switch
switch
AC input
terminal
terminal
Power cord
(Supplied)
(Supplied)
For power
outlet
outlet
: Cable clamp attachment
Cable
Cable clamp
attachment
attachment
Cable clamp
Click on the first or last page to see other PN-A601 (serv.man3) service manuals if exist.