Read Sharp PN-A601 (serv.man3) Service Manual online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-A601 OUTLINE OF THE PRODUCT
1 – 15
7 ) Attach the expansion board.
Fully insert the connector.
8 ) Secure the expansion board.
Secure the board with the 2 screws removed in Step 4).
9 ) Attach the attach the expansion terminal cover A.
Secure the cover with the 8 screws removed in Step 3).
10 )Affix the terminal label in the area indicated by (A) in the above
illustration.
4 - 2. PN-ZH601
■ INSTALLING PROCEDURES
CAUTION
n
In this machine, a dust-proof tape is attached to the nine installation holes of the glass fixing angle for attaching the protection glass (PN-
ZH601) which is recommended as an option. When attaching the protection glass, do not remove the dust-proof tape but insert the insertion
section of the glass fixing angle into the holes to break the tape, and fix the glass fixing angle without removing the tape.
section of the glass fixing angle into the holes to break the tape, and fix the glass fixing angle without removing the tape.
ILLUSTRATION OF THE PN-ZH601 INSTALLING PRO-
CEDURES
CEDURES
ILLUSTRATION OF THE INSTALLING HOLES OF THE
PN-A601 GLASS FIXING ANGLE
PN-A601 GLASS FIXING ANGLE
PN-A601 GLASS FIXING ANGLE INSTALLING PROCE-
DURE
DURE
Insert the tip
into the hole.
into the hole.
Connector
Connector
(A)
Insertion section of
the glass fixing angle
the glass fixing angle
LCD front
Insert the angle to fit with
the double holes in the
module side.
the double holes in the
module side.
Break the dust-proof tape,
and fix the screw.
and fix the screw.
Click on the first or last page to see other PN-A601 (serv.man3) service manuals if exist.