Read Sharp PN-A601 (serv.man3) Service Manual online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-A601 OUTLINE OF THE PRODUCT
1 – 14
4. OPTION
4 - 1. PN-ZB01
■ SUPPLIED ACCESSORIES
n
Expansion Board: 1
n
Terminal label: 1
n
Mounting screws: 1
n
Operation manual: 1
n
Speaker cable core: 2
n
Installation Manual (instructions for SHARP dealers and service engineers): 1
■ INSTALLATION PROCEDURE
CAUTION
n
Do not touch the connectors of this product and LCD MONITOR. The static electricity in your body may cause breakdown.
n
Touch a grounded source to discharge the static electricity in your body before starting operation.
n
The illustrations in this manual are for explanatory purposes and may not exactly represent the actual product.
1 ) Set the main power switch of the monitor to “off” and disconnect
the power from the wall outlet.
2 ) Spread a thick and soft cloth (such as a blanket) on a level surface,
such as a table, and place the monitor on it with its LCD panel fac-
ing downward.
3 ) Remove the expansion terminal cover A.
Remove 8 screws.
4 ) Remove the expansion terminal cover B.
Remove 4 screws.
5 ) Remove the dummy plate.
Remove 4 screws.
Give the dummy plate to the customer and ask them to store it.
Always install the dummy plate after removing the expansion
board.
6 ) Attach the expansion terminal cover B on the expansion board.
Secure the cover with the 4 screws removed in Step 5.
Apply the screw in order from (1) to (4).
Expansion terminal cover A
Expansion
terminal cover B
terminal cover B
Expansion
terminal cover B
terminal cover B
Expansion
terminal cover B
terminal cover B
Dummy plate
(3)
(4)
(1)
(2)
Expansion
terminal cover B
terminal cover B
Click on the first or last page to see other PN-A601 (serv.man3) service manuals if exist.