Read Sharp PN-655RE (serv.man3) Service Manual online
PN-655RU/655RE
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■
PRODUCT SPECIFICATIONS
Note: As a part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice.
The performance specification figures indicates are normal val-
ues of production units. There may be some deviation from these
values in individual units.
■
DIMENSIONAL DRAWINGS
Note: that the values shown are approximate values.
When mounting the monitor, read the manual of the brackets or stand
for their mounting procedure.
The screw holes for mounting brackets (M10
×
4 holes) are provided on
the rear of the monitor. Note that screw hole depth of the monitor is 1-3/
16 inch (30 mm). Loose holding may cause the product to fall, resulting
in serious personal injuries as well as damage to the product. The
screw and hole should come together with over 3/4 inch (20 mm) length
screw and hole should come together with over 3/4 inch (20 mm) length
of thread. SHARP recommends using mounting interface that comply
with UL1678 standard.
Model
PN-655RU/RE
LCD element
65" wide (163.9 cm diagonal)
ASV low-reflection black TFT LCD
ASV low-reflection black TFT LCD
Max. resolution
(pixels) 1920
×
1080
Max. colors
16.77 M colors (8 bits/color)
Pixel pitch
0.744mm (H)
×
0.744mm (V)
Viewing angle
170° right/left/up/down
(contrast ratio
(contrast ratio
>
10)
Screen active area
inch (mm)
31-5/8 (H)
×
56-1/4 (V) (804
×
1428)
Computer input signal
Analog RGB (0.7Vp-p) [75
Ω],
Digital (DVI 1.0 standard-compliant)
Sync
signal
signal
Horizontal/vertical separate
(TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
(TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system
PAL, PAL-60, SECAM, NTSC (3.58MHz),
NTSC (4.43MHz)
NTSC (4.43MHz)
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
Computer
signal
signal
Analog Mini D-sub 15 pin,
3 rows
×
1
Digital
DVI-D 24 pin
×
1
Computer
audio
audio
3.5 mm mini stereo jack
×
1
Serial
(RS-232C)
(RS-232C)
D-sub 9 pin
×
1
Composite
video
video
BNC
×
1
Component BNC (Y, Cb/Pb, Cr/Pr)
×
1
Audio
RCA pin (L/R)
×
1
Output terminals
Computer
signal
signal
Digital
DVI-D 24 pin
×
1
Serial
(RS-232C)
(RS-232C)
D-sub 9 pin
×
1
Audio
RCA pin (L/R)
×
1
Speaker
10 W
+
10 W [6
Ω]
Power requirement
AC 120 V, 60 Hz(PN-655RU) /
AC 100V-240V, 50/60Hz (PN-655RE)
AC 100V-240V, 50/60Hz (PN-655RE)
Operating
temperature
temperature
32 °F to 104 °F (0 °C to 40 °C)
Operating humidity
20% to 80% (no condensation)
Power consumption
560 W (Input signal waiting mode: 1.5 W,
Standby mode: 1.5 W)
Standby mode: 1.5 W)
Dimensions
inch (mm) Approx. 36-5/16
×
5-7/8
×
61-7/8
(923
×
150
×
1,572)
(excluding protrusions)
Weight
lbs. (kg) Approx. 145.5 (66)
Unit: inch [mm]
Opening width
(31-
3
/
4
[807])
34-
5
/
16
[871]
Opening height (56-
3
/
8
[1432])
61-
7
/
8
[1572]
5-
7
/
8
[150]
1
/
4
[6]
1-
9
/
16
[40]
1-
9
/
16
[40]
59-
7
/
16
[1509]
17-
5
/
16
[440]
39-
1
/
2
[1003]
36-
5
/
16
[923]
25-
9
/
16
[650]
Screw holes
for mounting brackets
for mounting brackets
Click on the first or last page to see other PN-655RE (serv.man3) service manuals if exist.