PN-655RE (serv.man3) - Sharp Monitor Service Manual (repair manual). Page 8

PN-655RU/655RE

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 5

■ REMOTE CONTROL

*Generally the monitor is operated using the remote control unit.

1)  Press the cover gently and slide it in the direction of the arrow.

2)  See the instructions in the compartment and put in the supplied bat-

teries (2 “AA”size batteries) with their plus (

+

) and minus (

−

) sides

oriented correctly.

3)  Close the cover.

Note:

•  The supplied batteries (2 “AA” size batteries) may become

exhausted faster depending on the storage condition. It is recom-

mended that you replace them with new batteries (commercially

available) earlier than specified.

•  If you will not use the remote control for a long time, remove the

batteries.

•  If the remote control does not work, even with new batteries, take

the batteries out, check whether they are facing the right way, then

replace them.

•  Use manganese or alkaline batteries only.

1 Signal transmitter
2 POWER button
3 MUTE button

Turns off the volume temporarily.

Press the MUTE button again to turn the sound back to the previ-
ous level.

4 VOL 

+

−

Pressing

or

displays the VOLUME menu when the

menu screen is not displayed.

Press

to increase the volume, and

to decrease the 

volume.

*If you do not press any buttons for about 4 seconds, the VOL-

UME menu automatically disappears.

5 BRIGHT 

+

−

Pressing

or

displays the BRIGHT menu when the menu

screen is not displayed.

Press

to increase the brightness of the screen, and

to

decrease the brightness of the screen.

*If you do not press any buttons for about 4 seconds, the BRIGHT

menu automatically disappears.

6 DISPLAY button

Displays monitor information. The display disappears when this
button is pressed again or disappears automatically after approxi-
mately 15 seconds.

7 MODE button

Each time you press this button, the screen mode changes in the
following order:

• STD (Standard) 

3 OFFICE 

*1

 

3 VIVID 3 sRGB

 *2

 

3 STD...

*1  : Display brightness is lowered. (This mode saves power.)
*2  : When the input mode is DIGITAL/ANALOG.

sRGB is international standard of color representation speci-
fied by IEC (International Electrotechnical Commission).
Color conversion is made in taking account of liquid crytal’s
characteristics and represents color tone close to its original
image.

8 SIZE button

Each time you press this button, the screen size changes in the fol-
lowing order.

WIDE 

3 ZOOM 1 3 ZOOM 2 3 NORMAL 3 DotbyDot 3

WIDE...

1

2

3

4

5

6

7

8

9

F

G

9 Cursor control (b/c/e /d ) buttons

• 

/

: Selects a desired item on the screen.

• 

/

: Adjusts the selected item.

F MENU button

Displays and turns off the menu screen.

G INPUT button

The input mode selection menu is displayed.

Press

or

to select the input terminal, and press

to

change the terminal.

*If the remote control unit is not available, you can select the input

terminal by pressing the input switch on the monitor with a

pointed object.

Video

Audio

DIGITAL

PC digital RGB input terminal

PC audio
input terminal

ANALOG

PC analog RGB input terminal

COMPONENT Component video input terminal Audio input

terminals

VIDEO

Composite video input terminal