Read Sharp PN-655RE (serv.man3) Service Manual online
PN-655RU/655RE
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 6
Remote control operation range
The operation range of the remote control unit is approx. 16.4 feet (5 m)
at an angle of approx 10° from the center to the top/bottom/right/left of
the remote control sensor.
the remote control sensor.
Caution:
• Do not expose the remote control unit to shock by dropping or step-
ping on it. This could lead to a malfunction.
• Do not expose the remote control unit to liquids, and do not place it
in an area with high humidity.
• The remote control unit may not work properly if the remote control
sensor is under direct sunlight or strong lighting. In such cases,
change the angle of the lighting, or operate the remote control unit
closer to the remote control sensor.
closer to the remote control sensor.
• Objects between the remote control unit and the remote control
sensor may prevent proper operation.
• Replace the batteries when they run low as this may shorten the
remote control’s operation range.
• If a fluorescent light is illuminated near the remote control unit, it
may interfere with proper operation.
• Do not use it with the remote control of other equipment such as air
conditioner, stereo components, etc.
■ DUAL SCREEN DISPLAY
You can display the screens of the PC input signal (DIGITAL/ANALOG)
and AV input signal (COMPONENT/VIDEO) simultaneously.
Set this function with “PIP MODES” in the MODE SELECT 3 menu.
• The currently selected input signal is displayed on the main screen.
• You cannot simultaneously display the screens of signals of the same
type, such as two types of PC input signals or two types of AV input
signals.
* When you select “COMPONENT” on the PbyP main screen and the
1080i video signal is input, the image quality cannot be changed
even if you adjust the value for “SHARPNESS” on the VIDEO
even if you adjust the value for “SHARPNESS” on the VIDEO
ADJUSTMENT menu.
Note:
• You might infringe on a copyright of the author which is protected
by copyright law when you display the images of the computer
screen and television/VCR simultaneously for profit-making or to
screen and television/VCR simultaneously for profit-making or to
show the image to the public.
• The screen size for dual-screen display is the same as the screen
size for single-screen display. The DotbyDot screen is displayed in
NORMAL size except when it is set as the PIP main screen.
• When dual-screen display is selected, the SCREEN MOTION func-
tion is disabled.
• When dual-screen display is selected, the screen cannot be
enlarged.
■ ENLARGE
You can set up 4, 9, or 16 monitors and integrate them into a single
large screen to display video. Each monitor displays an enlargement of
large screen to display video. Each monitor displays an enlargement of
1/4, 1/9, or 1/16 of the original image.
Note:
• AV input signals (COMPONENT/VIDEO) cannot be used for the
Enlarge function.
• To integrate 9 or more monitors using DIGITAL signals, a splitter for
the video signal (commercially available) is required.
• To use signals other than ANALOG signals, a splitter for the video
signal (commercially available) is required.
• When Enlarge is used, the SCREEN MOTION function is disabled.
PIP
A sub screen is displayed inside a main screen.
PbyP
A main screen and a sub screen are displayed in a line.
*
PbyP2
Displays a main screen which measures 1280 pixels in the
longest direction and a sub screen in a line.
longest direction and a sub screen in a line.
10˚
16.4 feet (5 m)
16.4 feet
(5 m)
16.4 feet
(5 m)
10˚
Remote control sensor
PIP
Example
Example
Example
PbyP
PbyP2
Main
screen
Main
screen
Main
screen
Sub
screen
Sub
screen
Sub
screen
0
1
2
3
4
5
6
7
8
0
1
1
2
2
4
5
6
8
9
10
3
7
11
12
13
13
13
14
14
14
15
4 screen monitor set-up
16 screen monitor set-up
0
1
3
2
9 screen monitor set-up
Click on the first or last page to see other PN-655RE (serv.man3) service manuals if exist.