Read Sharp PN-655RE (serv.man3) Service Manual online
PN-655RU/655RE
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 7
■
Switching the screen size
(When the input mode is DIGITAL/ANALOG)
Even when the screen size is changed, the display may remain the
same depending on the input signal.
* With a monitor with a screen resolution of 1600
×
1200, selecting
DotbyDot displays the NORMAL screen.
■
Switching the screen size
(When the input mode is COMPONENT/VIDEO)
Even when the screen size is changed, the display may remain the
same depending on the input signal.
*If “DotbyDot” is selected in the conditions below, the image quality
cannot be changed by adjusting the value of “SHARPNESS” from the
VIDEO ADJUSTMENT menu.
• When the input mode is VIDEO
• When the input mode is COMPONENT and images of 480i or 480p
are displayed
Note:
• Using this monitor’s screen-size switching or dual-screen display
functions to compress or expand the screen for commercial or pub-
lic viewing in establishments like cafes or hotels may infringe on the
lic viewing in establishments like cafes or hotels may infringe on the
rights of the creators, as protected by Copyright Law, so please be
careful.
• When “Enlarge” is set, the screen size is fixed to “WIDE” mode.
• When dual-screen display is selected, the screen size cannot be
changed.
• When using the screen-size switching function of this monitor, the
appearance of the original video may change if you select a screen
size with a different aspect ratio than the original image (e.g. TV
broadcast or video input from external equipment). Please consider
broadcast or video input from external equipment). Please consider
this point when selecting the screen size.
• When an ordinary non-wide image (4 : 3) is viewed with the whole
screen using the screen-size switching function of this monitor, the
edge of the image may be lost or appear distorted. If you wish to
edge of the image may be lost or appear distorted. If you wish to
respect the creator’s intentions, set the screen size to “NORMAL”.
• When playing commercial software, parts of the image (like subti-
tles) may be cropped. In this case select the optimal screen size
using the screen-size switching function of this monitor. With some
using the screen-size switching function of this monitor. With some
software, there may be noise or distortion at the edges or top of the
screen. This is due to the characteristics of the software, and is not
a malfunction.
a malfunction.
• Depending on the original image size (e.g. CinemaScope size),
black bands may remain at the top and bottom of the screen.
WIDE
Displays image so it fills the entire screen.
ZOOM 1
An image with a 4:3 aspect ratio is enlarged to fill the entire
screen without changing the aspect ratio. The edges of the
image may be cut off.
screen without changing the aspect ratio. The edges of the
image may be cut off.
ZOOM 2
Use this size if ZOOM 1 cuts off the subtitles.
NOMAL
Displays image so it fills the screen without changing the
aspect ratio of the input signals.
aspect ratio of the input signals.
DotbyDot
Displays the dots of the signals input from the connected
PC as the corresponding dots on the screen.
PC as the corresponding dots on the screen.
*
WIDE
An image with a 4:3 aspect ratio is stretched to fill the
entire screen.
entire screen.
ZOOM 1
An image with a 4:3 aspect ratio is enlarged to fill the entire
screen without changing the aspect ratio. The edges of the
image may be cut off.
screen without changing the aspect ratio. The edges of the
image may be cut off.
ZOOM 2
Use this size if ZOOM 1 cuts off the subtitles.
NOMAL
Displays the entire image of the aspect ratio of 4:3 without
changing the aspect ratio.
changing the aspect ratio.
DotbyDot
Displays the dots of the input signals as the corresponding
dots on the screen.
dots on the screen.
*
WIDE
ZOOM 1
ZOOM 2
DotbyDot
NORMAL
WIDE
ZOOM 1
ZOOM 2
DotbyDot
NORMAL
Click on the first or last page to see other PN-655RE (serv.man3) service manuals if exist.