Read Sharp UP-X300 (serv.man50) FAQ online
Q. Is it possible to prevent item discount being carried out on certain
Products.
Products.
A. Yes, there is a setting referred to as “% Relationship” here you can assign
specific PLU codes or Departments or Groups.
If the product is not associated in the above no discount can be carried out.
B/O: -POS Programming/Function/% Relationship
specific PLU codes or Departments or Groups.
If the product is not associated in the above no discount can be carried out.
B/O: -POS Programming/Function/% Relationship
4.21 Prevent PLU being sold when Countdown value reaches Zero
Q. Is it possible to prevent a countdown item being sold if the countdown
counter becomes zero?
A. Yes, there is a setting under the Employee Functions settings “Registration
when countdown value is 0” this means you prevent selling the item, the
feature is only available on the X300 (not X200)
when countdown value is 0” this means you prevent selling the item, the
feature is only available on the X300 (not X200)
4.22 Commission Rate
Q. Is it possible to have different commission rates for different products?
A. Yes, there is a lot of flexibility in the commission feature, for example you
can set Clerk 1 to receive 10% commission on 50% of sales against PLU 1,
there are four areas of programming for commission:
1. Revenue Centre/Clerk =Commission System 2. Item, Dept or Group
for product specific. 3. Employee Setting Rate per employee 4.
Commission =General setting
can set Clerk 1 to receive 10% commission on 50% of sales against PLU 1,
there are four areas of programming for commission:
1. Revenue Centre/Clerk =Commission System 2. Item, Dept or Group
for product specific. 3. Employee Setting Rate per employee 4.
Commission =General setting
4.23 Void Password
Q. Is it possible to set a Password against “Subtotal Voids” so that when an
operator performs a Subtotal Void the “enter password” box appears. So that
a manager or supervisor can then enter the password.
Q. Is it possible to set a Password against “Subtotal Voids” so that when an
operator performs a Subtotal Void the “enter password” box appears. So that
a manager or supervisor can then enter the password.
A. Yes, within POS Programming\Employee\Authority – select Subtotal void
and set the “Authority Level” to Operator and type in a password i.e.: 1234
save the changes. Within POS Programming\Employee\Employee Function
select Subtotal void and set the server to be “Allowed” and Password “Yes”
and set the “Authority Level” to Operator and type in a password i.e.: 1234
save the changes. Within POS Programming\Employee\Employee Function
select Subtotal void and set the server to be “Allowed” and Password “Yes”
4.24 Password Control
Q. Is it possible to have password control on certain functions and how long
is the password.
A. Yes, there is a range of functions that can have compulsory Password
entry, the Password for Servers can be between 1 and 8 Digits, numeric only.
Password for Operators must be 8 digit and depending on the set up should
be Numeric or Alpha.
entry, the Password for Servers can be between 1 and 8 Digits, numeric only.
Password for Operators must be 8 digit and depending on the set up should
be Numeric or Alpha.
4.25 Cashtipin & Noncashtipin
Q. Is it possible to enter a “cash tip” into the till and then finalise by Credit or
cheque.
Q. Is it possible to enter a “cash tip” into the till and then finalise by Credit or
cheque.
A. Yes, add the “Cashtipin” button to the keyboard, and enter the tip amount
then press Cashtip. When finalising the transaction you need to tender the tip
amount first via cash before finalising the rest of the transaction via Credit or
Cheque.
then press Cashtip. When finalising the transaction you need to tender the tip
amount first via cash before finalising the rest of the transaction via Credit or
Cheque.
Click on the first or last page to see other UP-X300 (serv.man50) service manuals if exist.