DV-RW250H (serv.man10). Recording - Sharp DVD User Guide / Operation Manual. Page 8

NOTES:
• Recording starts a few seconds be-

fore the preset starting time.

• You cannot use the timer recording

for the both DVD and VCR at the
same time.

• You can playback the DVD during

the VCR timer recording, and you
can playback the VCR during the
DVD timer recording.

• If the clock symbol (

) blinks when

the timer recording ended, the TV
program has not been completely
recorded because of an insufficient
capacity for DVD disc or video tape.
Press  TIMER REC to cancel the
timer program.

11

Select  “OK” and press ENTER. The timer program is deter-
mined and the TIMER REC SET screen appears again.

12

  When you enter the other program for the timer recording, re-

peat the steps 3 to 11.

13

Press SETUP. The TIMER REC SET screen disappears and
the display will return to the normal screen.

14

   Press TIMER REC. The timer indicator “ 

 ” will appear on the

display and the unit stands by for recording.
• If the program is DVD recording only, the unit will change to

VCR mode automatically. (The DVD mode cannot be selected.)

• If the program is VCR recording only, the unit will change to

DVD mode automatically. (The VCR mode cannot be selected.)

• If the programs are DVD and VCR recording, the unit will turn

off. If you want to use the unit, press TIMER REC again to
deactivate the timer.

• If the clock symbol (

) blinks in the display in spite of the

pressing of TIMER REC, the cassette may not have been
loaded yet. (see page 44)

• If the cassette is ejected in spite of the pressing of TIMER

REC, the erase prevention tab of the cassette may have been
removed. (see page 44)

When you want to check the selected timer recording, follow the steps 1
and  2 of “Setting timer recording” and display the TIMER REC SET
screen. To change the timer recording, select the program to be changed
and press ENTER. The changing method is the same as that for the
recording a program for the first time.

Display the TIMER REC SET screen.
Select the program you want to cancel and press CANCEL, then the
selected program will be erased from the timer recording list.

Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about
1 minute.

ENTER

RETURN

SETUP

BACK

END

SELECT

ENTER

TIMER REC SET

REC

REC

TO

MODE

TYPE
DATE (DD/MM)
START
END
CH
REC TO
REC MODE

OK

SETUP MENU

ONCE

1

DVD

LP

20/11(THU)

20:00
23:00

XP

SP

LP

SLP

8 : 00

11 : 00

9 : 00

10 : 00

Program 1

Prog.1

Deleted Parts

Non Recorded Portion Parts

Prog.2

Prog.3

Program 2

Program 3

Recording 
Control Settings

  2D50901A P44-57

7/20/04, 12:24 PM

55