DV-RW250H (serv.man10). Recording - Sharp DVD User Guide / Operation Manual. Page 3

Preparation:
• Turn ON the TV and select its AV channel (this may be labelled EXT

/ AUX etc.)

• Load a recordable DVD or video tape into the unit.
• Press DVD/VCR to select the appropriate mode.

1

Press REC MODE/SPEED to select the re-
cording mode.
The recording mode will appear on the TV
monitor and change every time REC
MODE/SPEED is pressed.
Video recording modes: SP/LP
DVD recording modes: XP/SP/LP/SLP

SP is the normal recording mode for video
tapes. LP offers 2 times the recording time
as SP. For more information on DVD re-
cording modes, see page 48.

2

Press the numeric keys or CH 

/

 to select the channel to be

recorded.
1~9 :     e.g. 5   = press “5”
10~80 : e.g. 29 = press “2” and “9” within

2 seconds.

3

Press   REC/OTR.

“   ” appears on the screen for about 4
seconds and recording will start.

• When recording onto a DVD, it

takes some time from when you
press   REC/OTR until recording
actually starts.
Press    REC/OTR  a little before
your preferred starting point.
With a video tape, recording starts
almost at the same time you press

 REC/OTR.

• If the erase prevention tab of video

tapes is removed, the tape will
eject when   REC/OTR is pressed
for recording.

00 : 00 : 00 SP

SP

DVD mode

VCR mode

CH  29

CH  29

VCR mode

DVD mode

INDEX

  2D50901A P44-57

7/20/04, 12:24 PM

50