DV-RW250H (serv.man10). Recording - Sharp DVD User Guide / Operation Manual. Page 4

Press STOP to stop recording.

NOTE:
When recording onto a DVD, even if STOP is
pressed during recording, recording does not
stop instantly. Recording may continue for as
long as approx. 10 seconds in the VR mode
or 30 seconds maximum in the Video mode.

Press  PAUSE/STILL  to avoid recording
unwanted material.
“4” will appear on screen for about 4 sec-
onds.
Press again to resume recording.

NOTES:
• In the recording onto a video tape, the pause function will be re-

leased after 5 minutes to prevent damage the video tape. The unit
will change to the STOP mode.

• When recording onto a video tape, you can change a recording chan-

nel in the recording pause mode. (You cannot change a recording
channel in the DVD recording pause mode.)

This VCR will automatically rewind
the tape when the tape has ended
(except during OTR and TIMER
REC). It will also eject the tape.

• If the disc space become full, the

recording is stopped and “RE-
CORDING INTERRUPTED” will
appear on the screen.

• In the event of a power failure dur-

ing DVD recording including OTR
and TIMER REC, the program can
not be recorded on the disc.
When the power resumes, after the
VCR/DVD is turned on, the set
checks the disc to repair the error
which is caused by a power failure.
This checking process may require
a few minutes to about 1 hour ac-
cording to disc condition. In this
process  “SYSTEM ERROR
PLEASE WAIT DISC CHECKING”
will appear on the screen.

  2D50901A P44-57

7/20/04, 12:24 PM

51