XL-30 (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 15

Press the ON/STAND-BY button to turn the
power on.

Press the FUNCTION button until “TP” appears
in the display.

●

Press the TAPE button on the remote control.

Open the cassette door by pushing the area
marked “

7

 PUSH EJECT”.

Load the cassette into the cassette compart-
ment.

Press the  

0

 button.

Press the 

■

 button.

To advance the tape, press the 

2

 button. To re-

wind, press the 

3

 button.

●

When removing the cassette tape, press the 

■

button, and then open the cassette compartment.

●

Before changing from one tape operation to an-
other, press the 

■

 button.

●

If a power failure occurs during tape operation,
the tape head will remain engaged with the tape
and the cassette door will not open. In this case,
wait until power is restored.

●

Even if the 

0

 / CD 

6

 button is pressed during

tape playback, the unit will not enter the pause
mode.
The pause mode is only active during synchro-
nised operation of the cassette deck and CD.
In the normal cassette mode, use the 

■

 button.

■

*XL-30H(SUK)P14-P18

00.2.8, 2:35 PM

14