Read Sharp XL-30 (serv.man2) User Guide / Operation Manual online
16
(Continued)
(Main unit operation)
1
Press the VOLUME/JOG button.
●
The preset channel number will flash.
2
Whilst the preset channel number is flashing,
turn the jog dial to select the desired station.
(Remote control operation)
Press the PRESET (
Press the PRESET (
or
) button for less than
0.5 seconds to select the desired station.
●
The stations (preset channel number, frequency
and frequency band) which have been stored in
memory will appear in the display in numerical
order, irrespective of the frequency bands.
and frequency band) which have been stored in
memory will appear in the display in numerical
order, irrespective of the frequency bands.
Note:
When searching for a memorised station, do not
press the PRESET button for more than 0.5 sec-
onds.
When the PRESET button is pressed for more than
0.5 seconds, the unit will enter the preset memory
scan mode.
When searching for a memorised station, do not
press the PRESET button for more than 0.5 sec-
onds.
When the PRESET button is pressed for more than
0.5 seconds, the unit will enter the preset memory
scan mode.
To recall a memorised station:
1
2
( )
PRESET
To clear a memorised station:
4
3
1
2
1
Press the VOLUME/JOG button.
2
Turn the jog dial to select the preset channel
number you want to erase.
3
Press the MEMORY/SET button.
4
Within 5 seconds, press the TUN CLEAR button.
1,2
1
To scan the preset stations, press the PRESET
(
(
or
) button for more than 0.5 seconds.
●
The station preset number flashes and pro-
grammed stations are sequentially received for
5 seconds each.
grammed stations are sequentially received for
5 seconds each.
2
Press the PRESET (
or
) button again to
stop the memory scan at the desired station.
Note:
When the preset memory does not have any sta-
tions stored in it, the preset memory scan will not
function.
When the preset memory does not have any sta-
tions stored in it, the preset memory scan will not
function.
Backup function:
The backup function protects all station presets for
a few hours should there be a power failure or the
AC power lead is removed from the AC socket.
a few hours should there be a power failure or the
AC power lead is removed from the AC socket.
■
Preset memory scan
The stations saved in the preset memory can be
scanned automatically.
scanned automatically.
*XL-30H(SUK)P14-P18
00.2.2, 3:57 PM
16
Click on the first or last page to see other XL-30 (serv.man2) service manuals if exist.