Read Sharp XL-30 (serv.man2) User Guide / Operation Manual online
17
RECORDING
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until “Cd” or “no
dISC” appears in the display.
dISC” appears in the display.
3
Load the desired disc.
●
Use the APMS function to store the tracks you
want to record in memory. (See page 13.)
want to record in memory. (See page 13.)
4
Load a cassette into the cassette compartment.
5
Press the REC PAUSE button.
●
“REC” will flash.
6
Press the
0
button.
To stop recording:
Press the
■
button.
●
The tape will stop. When the
■
button is pressed
again, the CD will stop.
●
When you press the CD
■
button on the remote
control, the CD and tape will stop.
■
Recording from the built-in radio
1
Tune in to the desired station. (See pages 15 -
16.)
16.)
2
Load a cassette into the cassette compartment.
3
Press the REC PAUSE button.
●
“REC” will flash.
Note:
●
If a whistling noise is heard whilst recording from
an AM station, move the AM loop aerial to a po-
sition where noise is no longer heard from the
unit.
an AM station, move the AM loop aerial to a po-
sition where noise is no longer heard from the
unit.
4
Press the
0
button.
To stop recording:
Press the
■
button.
■
Erasing a recorded tape
1
Press the FUNCTION button until “TP” appears
in the display.
in the display.
2
Press the REC PAUSE button.
●
“REC” will flash.
3
Press the
0
button.
●
When recording important selections, be sure
to make a preliminary test to ensure that the
desired material is being properly recorded.
to make a preliminary test to ensure that the
desired material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME, BASS and TREBLE controls may
be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
●
Metal and CrO
2
tapes should not be used for
recording.
■
Recording from the built-in CD player
(CD Synchronised Recording System)
1
2
6
4
5
2
3
4
*XL-30H(SUK)P14-P18
00.2.2, 3:57 PM
17
Click on the first or last page to see other XL-30 (serv.man2) service manuals if exist.