Read Sharp QT-120H User Guide / Operation Manual online
<P=002>
POWER SOURCE
■
AC power
Connect the AC power lead to the AC power input socket,
then connect the AC power lead plug to an AC socket.
then connect the AC power lead plug to an AC socket.
Notes:
●
If the unit will not be used for a long period of time, remove
the AC power lead from the AC socket.
the AC power lead from the AC socket.
●
When the AC power lead is plugged into the back of the
unit, the batteries are automatically disconnected.
unit, the batteries are automatically disconnected.
●
Never use a power lead other than the one supplied. Other-
wise, a malfunction or an accident may occur.
wise, a malfunction or an accident may occur.
●
If a humming noise occurs, turn the power plug upside
down where it is connected to the AC power input socket
on the unit.
down where it is connected to the AC power input socket
on the unit.
■
Battery power
1
Disconnect the AC power lead, and remove the battery
compartment cover.
compartment cover.
●
Use of the AC power lead disconnects the batteries.
2
Insert 8 "D" size batteries (UM/SUM-1, R20, HP-2 or simi-
lar) into the battery compartment.
lar) into the battery compartment.
●
When inserting batteries
④
and
⑧
, push them towards the
ë
battery terminal.
●
Installing the batteries incorrectly may cause the unit to
malfunction.
malfunction.
3
Replace the battery compartment cover.
Battery removal:
●
Push batteries
④
and
⑧
towards the
ë
battery terminal
and remove them.
Precautions for battery use:
●
Insert the batteries according to the direction indicated on
the rear panel.
the rear panel.
●
Remove the batteries if they are weak or if the unit is not
in use for long periods to prevent potential damage due
to battery leakage.
in use for long periods to prevent potential damage due
to battery leakage.
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Battery replacement:
Replace the batteries when they become weak and recording
or playback is impaired. This may occur even though radio
broadcasts are audible.
or playback is impaired. This may occur even though radio
broadcasts are audible.
To an AC socket
AC 230 V, 50 Hz
2
1
6
7
3
2
1
8
4
5
QT-120H(SUK) ?????????????
3
Click on the first or last page to see other QT-120H service manuals if exist.