Read Sharp QT-120H User Guide / Operation Manual online
YO
<P=001>
SPECIAL NOTES
●
When the STAND-BY/ON switch is set at STAND-BY po-
sition, mains voltage is still present inside the unit.
sition, mains voltage is still present inside the unit.
Warning:
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains danger-
ous voltages, always remove mains plug from the socket
before any service operation and when not in use for a long
period.
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains danger-
ous voltages, always remove mains plug from the socket
before any service operation and when not in use for a long
period.
Warning:
To prevent fire or shock hazard, do not expose this appliance
to dripping or splashing liquids.
To prevent fire or shock hazard, do not expose this appliance
to dripping or splashing liquids.
●
Recording and playback of any material may require con-
sent, which SHARP is unable to give. Please refer par-
ticularly to the provisions of the Copyright Act 1956, the
Dramatic and Musical Performers Protection Act 1958, the
Performers Protection Acts 1963 and 1972 and to any
subsequent statutory enactments and orders.
sent, which SHARP is unable to give. Please refer par-
ticularly to the provisions of the Copyright Act 1956, the
Dramatic and Musical Performers Protection Act 1958, the
Performers Protection Acts 1963 and 1972 and to any
subsequent statutory enactments and orders.
Note for users in the U.K.:
For other countries:
●
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright.
Please refer to the relevant laws in your country.
which must not be recorded without the authority of the
owner of the copyright.
Please refer to the relevant laws in your country.
ACCESSORY
AC power lead
×
1
●
For U.K. customers
●
For customers in
other countries
other countries
Note:
Parts and accessories mentioned in this operation ma-
nual other than those shown to the left are not included.
Parts and accessories mentioned in this operation ma-
nual other than those shown to the left are not included.
PRECAUTIONS
■
Please ensure that the equipment is positioned in a well
ventilated area and ensure that there is at least 10 cm of
free space along the sides, top and back of the equipment.
ventilated area and ensure that there is at least 10 cm of
free space along the sides, top and back of the equipment.
■
Do not use oil, solvents, petrol, paint thinners or insec-
ticides on the unit.
ticides on the unit.
■
Do not expose the unit to moisture, to temperatures higher
than 60˚C (140˚F) or to extreme low temperatures.
than 60˚C (140˚F) or to extreme low temperatures.
■
Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which gener-
ates electrical noise.
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which gener-
ates electrical noise.
■
Hold the AC power plug by the head when removing it
from the AC socket, since pulling the lead can damage
internal wires.
from the AC socket, since pulling the lead can damage
internal wires.
■
When cleaning the heads, pinch roller, etc, remove the
AC power plug from the wall socket as the unit contains
high voltages.
Do not remove the outer cover, as this may result in elec-
tric shock. Refer internal service to your local SHARP ser-
vice facility.
AC power plug from the wall socket as the unit contains
high voltages.
Do not remove the outer cover, as this may result in elec-
tric shock. Refer internal service to your local SHARP ser-
vice facility.
■
Use the unit on a firm, level surface free from vibration,
and do not place anything on the top of the unit.
and do not place anything on the top of the unit.
■
If the unit does not work properly whilst in use, set the
STAND-BY/ON switch to STAND-BY and then to ON
again.
STAND-BY/ON switch to STAND-BY and then to ON
again.
■
If a lightning storm is taking place near you, it is suggested
that you disconnect the AC power lead from the AC socket
for safety.
that you disconnect the AC power lead from the AC socket
for safety.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage than that
which is specified is dangerous and may result in a fire or
other type of accident causing damage. SHARP will not be
held responsible for any damage resulting from use of this
unit with a voltage other than that which is specified.
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage than that
which is specified is dangerous and may result in a fire or
other type of accident causing damage. SHARP will not be
held responsible for any damage resulting from use of this
unit with a voltage other than that which is specified.
■
Condensation
Sudden temperature changes and storage or operation in
an extremely humid environment may cause condensation
inside the cabinet (tape head, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no cassette in the
unit until normal playback is possible (about 1 hour).
an extremely humid environment may cause condensation
inside the cabinet (tape head, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no cassette in the
unit until normal playback is possible (about 1 hour).
■
Volume control
It is advisable to avoid exposure to high volume levels, which
occur whilst turning the unit on with the volume control set-
ting up high, or whilst continually listening at high volumes.
occur whilst turning the unit on with the volume control set-
ting up high, or whilst continually listening at high volumes.
QT-120H(SUK) ?????????????
2
Click on the first or last page to see other QT-120H service manuals if exist.