QT-120H - Sharp Audio User Guide / Operation Manual. Page 6

<P=004>

■

●

For playback, use normal or low-noise tape for the best
sound. (Metal or CrO

2

 tape is not recommended.)

For recording, use only normal tape.

●

Do not use C-120 tapes, tapes with large diameter reels,
or poor-quality tapes, as they may cause malfunctions.

●

Before loading a tape into the cassette compartment,
tighten the slack with a pen or pencil.

●

Cassettes have removable tabs which prevent accidental
recording or erasing from taking place. Removing the tab
will protect the corresponding side from being erased.
Cover the tab holes with adhesive tape to erase or record
again.

■

Set the TAPE/RADIO switch to TAPE.

Press the STOP/EJECT button and load a cassette into
the cassette compartment.

Press the PLAY button.

To advance the tape, press the STOP/EJECT button,
then press the F FWD button. To rewind, press the
STOP/EJECT button, then press the REWIND button.

Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.

Press the STOP/EJECT button.

●

Be sure not to press the PLAY and REWIND buttons sim-
ultaneously, or the tape will be damaged.

●

Before changing from one tape operation to another, press
the STOP/EJECT button.

●

When the end of the tape is reached during the recording,
playback, fast forward or rewind mode, the full auto stop
system is activated and automatically puts the unit into the
neutral (stop) mode.

●

If the PAUSE button is pressed whilst the fast forward or
rewind operation is in progress, the F FWD or REWIND
button will not be released when the tape end is reached.
In this case, press the STOP/EJECT button.

REWIND PAUSE

F FWD

TAPE

FM ST

FM MONO

RADIO

STAND-BY

ON

Side A (1)

Tab for side B (2)

Tab for side A (1)

QT-120H(SUK) ?????????????