Read Sharp CD-MPX100E User Guide / Operation Manual online
10/3/05
MPX100EE_1.fm
26
TINSEA093AWZZ
CD-MPX100E
Tape Recording
Recording on a cassette tape (continued)
n Recording from the radio
To interrupt recording:
Press the REC PAUSE (TAPE-2
Press the REC PAUSE (TAPE-2
) button.
To resume recording, press the / button.
To stop recording:
Press the button.
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
n Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
n Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
Make sure that the TAPE 1 is not in use.
1
Tune in to the desired station. (See page 21.)
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
4
Press the / button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape into
the TAPE 2 cassette compart-
ment.
into the TAPE 1 cassette com-
partment. Insert a blank tape into
the TAPE 2 cassette compart-
ment.
It is recommended that the recording tape is the same length as
the master tape.
the master tape.
3
Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
the display.
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the / button to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing towards you.
ment with the side to be erased facing towards you.
2
Press the TAPE (1 2) button until "TAPE 2" appears on the
display.
display.
3
Press the REC PAUSE (TAPE-2
) button.
4
Press the / button to start erasing.
Click on the first or last page to see other CD-MPX100E service manuals if exist.