CD-MPX100E - Sharp Audio User Guide / Operation Manual. Page 29

10/3/05

MPX100EE_1.fm

TINSEA093AWZZ

CD-MPX100E

When performing timer playback or recording using another unit con-
nected to the VIDEO/AUX INPUT socket, select "VIDEO" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.

Note:
The timer can also be set with the remote control.

When the preset time is reached, playback or recording will
start.
The volume will increase gradually until it reaches the preset 
volume.

When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer will operate at the same time every day. It will conti-
nue until the daily timer setting is cancelled. Cancel the daily 
timer when it is not used.

1

Press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 

 or 

 

 button to select 

"ONCE" or "DAILY", and press the MEMORY/SET (MEMORY) 
button. 

3

Within 10 seconds, press the 

 

 or 

 

 button to select 

"ONCE CAL" or "DAILY CAL", and press the MEMORY/SET 
(MEMORY) button.
The unit returns to the timer stand-by mode after displaying the 
setting in order.

1

Press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 

 or 

 

 button to select 

"ONCE" or "DAILY", and press the MEMORY/SET button. 

3

Within 10 seconds, press the 

 

 or 

 

 button to select 

"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET 
(MEMORY) button.
Timer will be cancelled (the setting will not be cancelled).

The timer setting will be memorised once it is entered. To reuse the 
same setting, perform the following operations.
1

Turn the power on and press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 

 or 

 

 button to select 

"ONCE" or "DAILY", and press the MEMORY/SET (MEMORY) 
button. 

3

Within 10 seconds, press the 

 

 or 

 

 button to select 

"ONCE ON" or "DAILY ON", and press the MEMORY/SET 
(MEMORY) button.

4

Press the ON/STAND-BY button to enter the power stand-by 
mode.