Read Sharp CD-MPX100E User Guide / Operation Manual online
10/3/05
MPX100EE_1.fm
22
TINSEA093AWZZ
CD-MPX100E
Radio
Listening to the radio
(continued)
n Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
n To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
lect the desired station.
n To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset
memory scan)
memory scan)
n To erase entire preset memory
1
Perform steps 1 - 3 in "Tuning" on page 21.
2
Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
preset tuning saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
memorised for that preset channel number will be erased.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
tion is located.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the REC PAUSE button and the X-BASS/
DEMO button, press the TUNER button until "TUNER CL" ap-
pears.
DEMO button, press the TUNER button until "TUNER CL" ap-
pears.
DISPLAY
Click on the first or last page to see other CD-MPX100E service manuals if exist.