Read Sharp CD-MPX100E User Guide / Operation Manual online
10/3/05
MPX100EE_1.fm
30
TINSEA093AWZZ
CD-MPX100E
Advanced F
eatu
res
Timer and sleep operation (continued)
n Sleep operation
The radio, compact disc and cassette tape can all be turned off au-
tomatically.
tomatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
n To use timer and sleep operation together
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
"SLEEP", and press the MEMO-
RY/SET (MEMORY) button.
RY/SET (MEMORY) button.
4
Press the
or
button to select time.
(Maximum: 3 hours - Minimum: 1 minute)
l 3 hours - 5 minutes 5 - minute intervals
l 5 minutes - 1 minute 1 - minute intervals
l 5 minutes - 1 minute 1 - minute intervals
5
Press the MEMORY/SET (MEM-
ORY) button.
ORY) button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
operation finishes.
1
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select
"SLEEP X : XX".
"X : XX" is sleep remaining time.
"X : XX" is sleep remaining time.
l The remaining sleep time is displayed for about 10 seconds.
l You can change the remaining sleep time whilst it is displayed
l You can change the remaining sleep time whilst it is displayed
by pressing the MEMORY/SET button (steps 4 - 5).
1
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select
"SLEEP OFF", and press the MEMORY/SET (MEMORY) button.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.
For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback or recording
2 Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 27 - 28).
Sleep timer setting
Timer playback or
recording setting
recording setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback or recording
start time
start time
End time
1 minute - 3 hours
Desired time
Click on the first or last page to see other CD-MPX100E service manuals if exist.