Read Sharp CD-MPX100E User Guide / Operation Manual online
10/3/05
MPX100EE_1.fm
25
TINSEA093AWZZ
CD-MPX100E
Tape Recording
n Recording from a CD or MP3/WMA disc
You can record 3 discs continuously.
To perform programmed recording:
To stop recording:
Press the button.
The disc and tape will stop.
Press the button.
The disc and tape will stop.
Note:
l Whilst recording, OPEN/CLOSE button is deactivated. It is rec-
l Whilst recording, OPEN/CLOSE button is deactivated. It is rec-
ommended to perform disc recording after closing the disc tray.
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the CD button and load the desired disc.
4
Press one of the 1 - 3 buttons on the remote control to
select the disc to be recorded first.
select the disc to be recorded first.
5
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
6
Press the / button to start recording.
l Disc playback will start approximately 7 seconds after the
l Disc playback will start approximately 7 seconds after the
tape starts.
l Recording is started from the selected disc. When the play-
back of the last disc is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
reached, the disc and the cassette will stop automatically.
1
Programme discs and tracks. (See page 20.)
2
Press the REC PAUSE (TAPE-2
) button.
3
Press the / button.
Click on the first or last page to see other CD-MPX100E service manuals if exist.