Read Panasonic TC-29P10N / TC-33P10N Service Manual online
- 10 -
Inspection and exchange of the rear termi-
nal switching board [H]
nal switching board [H]
1. Remove the screws fixing the rear terminal cover (3
screws), disengage the locking tabs (4 places), and
remove the rear terminal frame.
remove the rear terminal frame.
2. Disengage the cable (between H5 and L1) from the lead
clamp on the print holder, and tilt the rear terminal switch-
ing board [H] down to the front.
ing board [H] down to the front.
3. Inspection is possible in the following condition.
4. In case of exchange, disconnect the coupler H5 from the
4. In case of exchange, disconnect the coupler H5 from the
rear terminal switching board [H], and disengage the cou-
pler in upward direction either in this condition or with the
rear terminal switching board [H] slightly raised.
pler in upward direction either in this condition or with the
rear terminal switching board [H] slightly raised.
Rear terminal frame screws (3 screws)
Locking tab
Locking tab
Rear terminal
switching board [H]
switching board [H]
Coupler H5
Rear terminal switching board [H]
Lead clamp
Print holder
Coupler H5
Rear terminal switching board [H]
!"
Click on the first or last page to see other TC-29P10N / TC-33P10N service manuals if exist.