Read Panasonic TC-29P10N / TC-33P10N Service Manual online
- 12 -
Adjustment
In regard to service adjustment mode
As shown in the following table, adjustment is required when some parts have been exchanged.
: Always requires adjustment : Confirmation by pattern, adjustment as required.
: Confirmation by TV signal, color bar signal, etc., adjustment as required.
: Confirmation by TV signal, color bar signal, etc., adjustment as required.
White balance adjustment
H-V adjustment
Amplitude compensation
adjustment
adjustment
DAF phase adjustment
Focus adjustment
Contrast adjustment
Color output/hue adjustment
Memory
IC1114
IC1114
Digital core
board [DG]
board [DG]
Video signal
processing
board [AG]
processing
board [AG]
Picture tube
Deflection yoke
Flyback
transformer
T551
transformer
T551
DAF board
[DF]
[DF]
Adjustment
Exchange part
WB
H-V
G-MAG
OPT
H-V
G-MAG
OPT
Operation on the main unit
Remote control buttons
Switch off the power with the [POWER] button
on the main unit or the [POWER] button
on the remote control.
on the main unit or the [POWER] button
on the remote control.
Cancellation
Next, press three times.
Press
[VOL -]
Remote
control button
control button
Screen for one
horizontal line
horizontal line
Adjustment
Adjustment
item selection
item selection
Contents
Selection of
main items
main items
Volume +/-
Selection of
sub-items
sub-items
For white balance
adjustment
adjustment
1
2
3
5
4
*Channel selection is done with the [CHANNEL ] button.
Press the button [VOL -] inside the door of the main unit while
pressing the button [Recall ] on the
remote control transmitter three times in a row (within 2 seconds).
pressing the button [Recall ] on the
remote control transmitter three times in a row (within 2 seconds).
How to enter into service adjustment mode
+
[Recall ]
+
P
anasonic
1
2
3
4
5
6
7
8
9
0
-/--
+
-
+
TV/A
V
•
Caution item
1. After entering service adjustment mode, perform adjustment after making notes of the values for each item. The written
values (data) differ according to the set. Using the notes value as a referncefacilites adjustment.
2. The iten [OPT
] (OPT adjusmtment) in the contents for service adjusmtent mode is for aadjusmtment at the plate.
Stay away form this item, at it means adjustment of all items.
!"
Click on the first or last page to see other TC-29P10N / TC-33P10N service manuals if exist.