Read Panasonic TC-29P10N / TC-33P10N Service Manual online
- 14 -
•
H-V adjustment
For adjustment to 16:9, switch by pressing
the screen mode button of the remote control twice.
The values in brackets are for 16:9 mode.
the screen mode button of the remote control twice.
The values in brackets are for 16:9 mode.
V-HET
3F
V-L, IN
24
V-SCR
3A
V-POS
1A
H-WID
1F
H-POS
0B
H-PIN
1E
V-BKD
V-BKU
H-HET
06
V-EHT
04
H-BPN
08
H-TPN
06
H-KEY
2B
Button "
" for selection in forward direction
Button "
" for selection in reverse direction
Vertical amplitude (00 to 7F)
4:3 (fixed to 3F)
16:9 (fixed to 3F)
4:3 (fixed to 3F)
16:9 (fixed to 3F)
Vertical linearity
(00 to 3F)
(00 to 3F)
Vertical S-shape compensation
(00 to 3F)
(00 to 3F)
(3F)
(1C)
(1C)
(19)
(20)
(0B)
(12)
(23)
(17)
(06)
(04)
(06)
(07)
(29)
Vertical position
(00 to 3F)
(00 to 3F)
Horizontal amplitude
(00 to 3F)
(00 to 3F)
Horizontal position
(00 to 1F)
(00 to 1F)
Vertical pin level
(00 to 3F)
(00 to 3F)
Vertical blanking
(bottom)
(00 to 7F)
(bottom)
(00 to 7F)
BKU
16:9
BKU
Vertical blanking
(top)
(00 to 3F)
(top)
(00 to 3F)
Horizontal amplitude compensation (00 to 0F)
4:3 (fixed to 06)
16:9 (fixed to 06)
4:3 (fixed to 06)
16:9 (fixed to 06)
Vertical amplitude compensation (00 to 0F)
4:3 (fixed to 04)
16:9 (fixed to 04)
4:3 (fixed to 04)
16:9 (fixed to 04)
Lower pincushion (lower pincushion corners)
(00 to 0F)
(00 to 0F)
Top pincushion (upper pincushion corners)
(00 to 0F)
(00 to 0F)
Vertical pin keystone distortion
(00 to 3F)
(00 to 3F)
Adjustment only at the time of 16:9 mode
•
Caution items
1. When H-key (vertical pin keystone distortion) is adjusted, the vertical position changes, and V-POS (vertical
position) must be adjusted.
However, when the vertical position is raised too much, the on-screen display no longer can be seen.
However, when the vertical position is raised too much, the on-screen display no longer can be seen.
2. The item [OPT
] (OPT adjustment) in the contents for service adjustment mode is for adjustment at the plant.
Stay away from this item, as it means adjustment of all items.
3. After entering service adjustment mode, perform adjustment after making notes of the values for each item. The
written values (data) differ according to the set. Using the noted values as a reference facilitates the adjustment.
Button "
" for selection
in forward direction
OPT
(OPT adjustment)
H-V
(H-V adjustment)
WB
(WB adjustment)
(Sub-adjustment)
Button "
" for selection
in reverse direction
Initial screen for service adjustment mode
For factory adjustment,
do not touch.
do not touch.
G-MAG
(G-MAG adjustment)
WB
H-V
G-MAG
OPT
H-V
G-MAG
OPT
# !"
Click on the first or last page to see other TC-29P10N / TC-33P10N service manuals if exist.