Read Sharp VC-M303 (serv.man19) User Guide / Operation Manual online
3
If problems persist contact the SHARP Helpline on tel: 0990-274277
BEFORE USING YOUR VCR
UNPACKING THE ACCESSORIES
To fit the batteries into the remote control
Remove the battery cover on the back of the remote control.
Fit the batteries:
to
and
to
. terminals. Place the
battery cover back into position.
CHECK ALL THESE ACCESSORIES ARE SUPPLIED WITH YOUR VCR. CONTACT YOUR DEALER IF
ANY ARE MISSING.
ANY ARE MISSING.
(TYPE AA/R6/UM3)
BATTERIES (X2)
BATTERIES (X2)
for the remote control unit.
RF CONNECTION CABLE
connects the VCR to the TV.
Remote Control
•
Remote Control must be pointed towards the VCR to operate.
•
Do not expose to liquid or shock.
•
May not function if the VCR is in direct sunlight or any other strong light.
•
Replace both alkaline batteries (type AA/R6/UM3) if the remote control
fails.
fails.
•
Remove the batteries and keep in a safe place if you do not plan to use
the VCR for several months.
the VCR for several months.
•
Remove and dispose of flat batteries safely and promptly.
•
Incorrect use of batteries may cause them to leak or burst.
Battery cover
MENU
SET
CLEAR
DISPLAY
STANDBY
DPSS
INPUT SELECT
CHANNEL
AM/PM
VIDEO CASSETTE RECORDER
SLOW
SV/V+/
TIMER
TIMER
MODE OSD
INPUT
SELECT
CH
CH
OPERATE
VOL
VOL
TV
TIMER
ON/OFF
AUDIO
OUT
SKIP
SEARCH
ZERO
BACK
BACK
TAPE
SPEED
TV/VCR
+
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
2
3
1
4
7
5
8
0
6
9
REMOTE CONTROL
TINS3807 ENGLISH.book Page 3 Wednesday, May 10, 2000 10:17 AM
4
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
CONNECTING THE CABLES
✔
The VCR is correctly connected.
EXISTING AERIAL
OR CATV CABLE
OR CATV CABLE
Connect your existing aerial
cable to the
cable to the
ANTENNA IN
socket on your VCR.
1
2
3
Connect your TV to the VCR using the
supplied RF connection cable, i.e.
connect the VCR
supplied RF connection cable, i.e.
connect the VCR
RF OUT
socket to
the TV
AERIAL IN
socket.
Connect the
VCR to the
mains.
VCR to the
mains.
BACK OF
TELEVISION
TELEVISION
Optional
SCART (not supplied). If you
have a scart lead connect it to your TV and
LINE 1 IN/OUT
socket on the VCR.
- The advantage of a Scart connection is
improved picture and sound quality during
playback.
improved picture and sound quality during
playback.
SCART LEAD
AERIAL
RF CONNECTION
CABLE
AERIAL
RF CONNECTION
CABLE
Module 02.fm Page 4 Monday, May 15, 2000 12:01 PM
5
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
1.
Press the
STANDBY
button to ensure your
VCR is in the STANDBY mode. The display on the
front of the VCR should show “
front of the VCR should show “
SHARP
”, if not,
please perform the VCR RESET procedure on
page 30.
page 30.
2.
Press and hold the
button located on VCR
front panel for 3 seconds.
The VCR will search and display an ideal
channel.
Wait for the flashing channel number to appear on the VCR display, this number will be
between 21 and 69.
The VCR will search and display an ideal
channel.
Wait for the flashing channel number to appear on the VCR display, this number will be
between 21 and 69.
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF on page 30.
to RF through ON/OFF on page 30.
3.
Switch on the
TV
.
4.
Select the next available or unused channel on your TV, this will become the dedicated
video channel.
video channel.
Example of
TV channels
TV channels
5.
Tune the selected channel on your TV until the screen below appears.
(Refer to your TV manual for instructions on how to tune in your TV).
(Refer to your TV manual for instructions on how to tune in your TV).
Store this as your VCR channel.
6.
Press the
button to place the VCR back into STANDBY. (The MENU screen will not
be displayed when the VCR is in STANDBY mode.)
1 = BBC1
4 = Channel 4
2 = BBC2
5 = Channel 5
3 = ITV
? = VCR
MENU SCREEN
ME NU
T I ME R
MOD E
S E T U P
: S E L EC T
S E T
: E N T E R
ME NU : E X I T
EXAMPLE
(Blue background
with white text)
Module 03G.fm Page 5 Monday, May 15, 2000 9:34 AM
6
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
AUTO INSTALLATION
This model automatically tunes the TV channels in your area.
Turn the TV on and select the video channel. (As previously explained).
1.
Press
STOP
to switch on
the VCR.
2.
Follow the instructions that appear
on the TV screen by pressing the
button. (Auto tune may take a
few minutes)
NOTE:
•
If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you
wish to reset your VCR and start the installation again, refer to
wish to reset your VCR and start the installation again, refer to
VCR RESET
at the back
of the book.
STOP
STOP
SET
SET
P L E A S E
B E
S UR E
T H E
A E R I A L / S CAR T
CAB L E I S
CONN E C T E D T O YOUR V CR .
P R E S S
P R E S S
S E T
T O CON T I NU E
S E T
: E N T E R ME NU : E X I T
AU T O
I N S T A L L A T I ON
P R E S S
S E T
K E Y
T O S T AR T
S E T
: E N T E R ME NU : E X I T
Press the
button.
SET
1
CH 2 2
AU T OMA T I C
T UN I NG .
P L E A S E WA I T .
ME NU : E X I T
See next page to continue
Button positions for your reference.
REMOTE CONTROL
Press the
button.
SET
Module 03G.fm Page 6 Monday, May 15, 2000 9:37 AM