Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
ELE-2
1-3. System Hook up Procedures
1. Unscrew 1 screw and remove the EVR cover.
2. Connect the 2 pcs. of 30 pin flat cables (VFK1317) between P101/P102 on the Measuring Board (VFK1308P),
and 2 connectors on the EVR Connector Board (VFK1309A). Make sure that the contact surface of 2 pcs. of 30
pin Flat Cables are inner side and direction of the EVR Connector Board is as shown in Figures. Then connect
the Extender board (VFK1694).
pin Flat Cables are inner side and direction of the EVR Connector Board is as shown in Figures. Then connect
the Extender board (VFK1694).
EVR cover
VFK1308P
VFK1309A
VFK1694
Part side
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.