Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
ELE-5
3. PC EVR (ADJUSTMENT) SOFTWARE
3-1. BOOT UP THE ADJUSTMENT SOFTWARE
1. Copy all files of EVR software (VFK1811B:NTSC / VFK1840A:PAL) to created directly on PC.
2. Restart the PC in DOS mode.
3. Type “DVX100” and press ENTER key, then EVR software boot up.
4. Wait for a few seconds so that the EVR adjustment program is started.
2. Restart the PC in DOS mode.
3. Type “DVX100” and press ENTER key, then EVR software boot up.
4. Wait for a few seconds so that the EVR adjustment program is started.
PRESS ENTER KEY
PRESS ENTER KEY
Normally this screen is appeared. We
recommended store the EEPROM data
before start adjustment. If you want to
skip store the data, PRESS ESC KEY,
then goes to Main menu.
recommended store the EEPROM data
before start adjustment. If you want to
skip store the data, PRESS ESC KEY,
then goes to Main menu.
In case of select No.1
NOTE:
In case of communication
error occurred in DOS
mode, please try to boot an
EVR software in MS-DOS
WINDOWS screen.
In case of communication
error occurred in DOS
mode, please try to boot an
EVR software in MS-DOS
WINDOWS screen.
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.