Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
MECH-22
2-3-20. T3 Rod & Brake Rod
1. Remove the T3 Rod. The projection (p) and (q) on
the T3 Rod meet with the guide (p') and (q') on the
Mechanism Chassis.
Mechanism Chassis.
Figure 2-3-31
2. Unscrew 2 screws (V) and remove the Brake Rod,
Brake Rod Plate A and B.
Figure 2-3-32
(Note of installation)
The projection (r) and (s) on the Brake Rod meet with
the guide (r') and (s') on the Mechanism Chassis.
2-3-21. Capstan Belt
1. Remove the Center Gear and Washer (W).
Unscrew screw (X) and remove LED Holder.
Remove Cut Washer (Y).
Remove Cut Washer (Y).
Figure 2-3-33
(Loosen a black screw on the Cap. Motor as shown in
Fig.) Slightly lift up in the direction and slowly remove
the Capstan Gear. Do not bend the Capstan Shaft.
Figure 2-3-34
2. Remove the Capstan Belt.
(Note of installation)
After install Capstan Gear, confirm no warp of the
Capstan Gear, no bend of the Capstan Gear Shaft
and smooth rotation of the Capstan and Center Gear.
Figure 2-3-35
Grease
Point
Grease
Point
Point
Grease
Point
Point
Grease
Point
Point
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.