Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
MECH-17
(Note of installation with T3 Arm Unit)
After install T3 Arm Unit, the Height Adjustment is
required.
Figure 2-3-10
(Note of installation with Pinch Arm Unit)
Hooking portion of the Pinch Arm Spring is;
Spring (c) -- Pinch Arm (c')
Spring (d) -- T3 Rod (d')
Spring (d) -- T3 Rod (d')
Figure 2-3-11
2-3-8. Tension Arm Unit
1. Turn the Mode Gear until Tension Arm Unit slightly
move to loading direction.
2. Remove the Tension Arm Unit and Cut Washer (J).
Figure 2-3-12
(Note of installation)
The projection (e) on Tension should be match to
guide (e') on the T3 Rod which is shifted by turning
Mode Gear.
2-3-9. S & T Reel Tables
1. Unhook the hooking portion (f) and (f'). Unscrew 3
screws (K) and remove Cover Plate.
Figure 2-3-13
Grease
Point
Point
Grease Point
Grease Point
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.