Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online
MECH-16
2-3-4. Head Amp C.B.A.
1 Unscrew screw (F) and remove the Capstan
Cover.
2 Disconnect the connector FP5001 and unscrew 2
screws (G) and remove the Head Amp C.B.A. with
shield case.
shield case.
3 Unsolder the 2 solder portion and remove the
shield case from Head Amp C.B.A..
Figure 2-3-6
2-3-5. Cylinder Unit
1. Unscrew 3 screws (H) and remove the Cylinder
Unit carefully. Do not touch the Video Head.
Figure 2-3-7
2-3-6. Cleaning Arm Unit
1. Unlock the locking portion of the Cleaning Arm Unit
(Note of installation)
Hooking portion of the Cleaning Arm Spring is;
Spring (a) -- Cleaning Arm spring (a')
Spring (b) -- T2 Arm Unit (b')
(Note of installation)
Hooking portion of the Cleaning Arm Spring is;
Spring (a) -- Cleaning Arm spring (a')
Spring (b) -- T2 Arm Unit (b')
Figure 2-3-8
2-3-7. Pinch Arm & T3 Arm Unit
1. Unscrew screw (I), then slide the Pinch Pressure
Plate and unlock the locking portion.
2. Remove the T3 Arm Unit.
3. Remove the Pinch Arm Unit and Pinch Arm Spring.
3. Remove the Pinch Arm Unit and Pinch Arm Spring.
Figure 2-3-9
Cleaning Arm Unit
Spring
A
A’
B
B’
Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.