Read Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual online
INF-12
SECTION 1 SERVICE INFORMATION
<MZ16K/MZ13K/MZ10K>
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3.1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "15653" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3.2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
3.3. Functions of Service Mode
* Function varies according to a version of the main microcomputer software.
3.3.1. EXTRA OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
SERVICE PASSWORD
INPUT
SET
****
ENTER
0
～
9
SERVICE PASSWORD
USER MODE
RETURN
MENU
1. DYNAMIC GAMMA MODE
• Setting of the DYNAMIC GAMMA operation.
- ON : Enable the Dynamic gamma function. (Default setting)
- OFF : Disable the Dynamic gamma function.
EXTRA OPTION
1/2
DYNAMIC GAMMA MODE
3DCMS
SHUTTER KEEP
ON
ON
ON
OFF
L
---
SELF CHECK
FLICKER ADJUST
POWER OFF MESSAGE
ERROR OSD
MODEL
LIGHT RUNTIME RESET
PANEL TYPE SETTING
RGB PIXEL ADJUST
GHOST FB CALIBRATION
CLOG SENSOR CALIBRATION
FLICKER ADJUST
POWER OFF MESSAGE
ERROR OSD
MODEL
LIGHT RUNTIME RESET
PANEL TYPE SETTING
RGB PIXEL ADJUST
GHOST FB CALIBRATION
CLOG SENSOR CALIBRATION
MENU SELECT
CHANGE
1.
2.
4.
8.
6.
9.
5.
3.
7.
11.
12.
10.
DISABLE
EXTRA OPTION
2/2
MUTE TIME OFFSET
INDICATOR SETTING
OFF
0SEC.
0
POWER ON
COMMAND CONTROL TIMEOUT
DIGITAL LINK OPTION
HDMI HOT PLUG CONTROL
DIGITAL LINK OPTION
HDMI HOT PLUG CONTROL
ON
ON
ON
WAVE PLATE CONTROL
LIGHTS OUT CONTROL
LIGHTS OUT CONTROL
MENU SELECT
CHANGE
13.
15.
14.
16.
17.
18.
19.
Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.