PT-DZ570U, PT-DZ570E, PT-DW530U, PT-DW530E, PT-DX500U, PT-DX500E (serv.man8) - Panasonic Projector Service Manual (repair manual). Page 15

Read Panasonic PT-DZ570U / PT-DZ570E / PT-DW530U / PT-DW530E / PT-DX500U / PT-DX500E (serv.man8) Service Manual online

<
PT-DZ570U/PT-DW530U/PT-DX500U/PT-DZ570E/PT-DW530E/PT-DX500E>
4. External control
  4. 1. Control by SERIAL termanal
    4. 1. 1. Connecting exsample
    4. 1. 2. Pin assignment and signal
4. 1. 3. Communication condition
Pin
NC
GND
Ground
CTS
RTS
Name
Signal
 NC
TXD
Transmitting data
RXD
Receiving data
The serial input interface on the side is based on RS-232C standard so that it can be controlled by connecting to PC.
And also plural projectors control is possible with using SERIAL output interface.
Connented each
other inside
X Parameter
S Parameter
 
RS-232C standard
 Asynchronous
 
9 600 bps
 None
Signal level
Synchronization
Baud rate
Parity
 8 bit
 1 bit 
 None
 None
Character length
Stop bit
D-sub 9pin(Female)
Outside view
(Factory  default)
Note
Interface cable is not a standard accessory. Please purchase locally.
Computer
Interface at the side
D-Sub 9p(Male)
INF - 9
    4. 1. 4. Communication condition setting
1. Press MENU botton of main body or remote controller.
      Go to Main menu -> Projector stup.   In sub menu, select "RS-232C" and press ENTER.  
2. Select communication condition by pressing  ▲ ▼ button.
      Set it with pressing              button.
3. Press MENU button 3 times and return to regular display.
    4. 1. 5. Specification of cable communication
  
In case of connecting to PC
NC
NC
NC
NC
Projector side
DSR
NC
NC
NC
 NC
RTS
7
5
1
2
8
9
8
9
6
3
1
2
3
6
7
4
5
4
  PC side
  (DTE spec)
(Factory  default)
INF - 9
Page of 71
Display

Click on the first or last page to see other PT-DZ570U / PT-DZ570E / PT-DW530U / PT-DW530E / PT-DX500U / PT-DX500E (serv.man8) service manuals if exist.