Read Panasonic DP-3510 Service Manual online
127
DP-3510/4510/6010
JUL 2002
Edition 2.0
QUANTUM Control Timing
QUANTUM works in all Copy/Print/Fax operation
If starting copy/print/fax job or accessing any keys during QUANTUM, the QUANTUM will be canceled then previous QUANTUM values
will be effective
No
Trigger
Remark
1
When F8-09 is performed
After performing F8-09
Wait approximately
30 - 90 sec for the
QUARC to start *1
2
At 200, 400, 600, 800 and 1000 prints after F8-09 is
performed
Upon reaching the specified
number of prints *2
3
Every 1000 prints from 1001 prints after F8-09 is
performed
Upon reaching the specified
number of prints *2
4
When the F6-28 value is changed
Upon returning to F6 initial display
5
When the F6-29 value is changed
Upon returning to F6 initial display
6
When the F6-39 value is changed
Upon returning to F6 initial display
7
When the F6-52 value is changed
Upon returning to F6 initial display
8
When the Power Switch is turned ON
After the Power Switch is turned
On
9
At 100 prints after the Power Switch is turned ON
Upon reaching the specified
number of prints *2
10
When the Auto Off mode is cancelled
After canceled the Auto off mode
11
At 100 prints after the Auto Off mode is cancelled
When reach to counters *2
12
6 hours after the previous QUARC
After reaching the specified
number of prints
13
At 100 prints after the 6 hours lapse from the previous
QUARC
Upon reaching the specified
number of prints *2
14
At 100 prints after canceling U13
Upon reaching the specified
number of prints *2
15
When F8-14 is performed
After F8-14 is performed
<Note>
*1) Start timing of QUANTUM:
- QUANTUM starts when the machine is ready (It will not work during copy/print/fax)
- The start of QUANTUM may change depending on machine status
*2) Any counts are referring to Total Counter
QUARC Start Timing
