Read Panasonic DP-3510 Service Manual online
119
DP-3510/4510/6010
JUL 2002
Edition 2.0
3.5.
Resetting the P/M (Preventive Maintenance) Counter
When the machine reaches the preset P/M Cycle, it will show “Call for P/M” or “Replace The Toner Waste
Container” on the LCD Display. The PM Counter can be reset by following the procedure below.
Container” on the LCD Display. The PM Counter can be reset by following the procedure below.
3.5.1.
“Call for P/M” (Default: 120K (DP-3510/4510), 240K (DP-6010))
1. Perform the P/M (Preventive Maintenance). Refer to Section 3.3 and 3.4.
2. Press the "FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)" and “3” keys simultaneously in that order
2. Press the "FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)" and “3” keys simultaneously in that order
to enter the Service Mode.
3. Enter the Copy Service Mode F5-70 (PM cycle) and change to the desired value.
4. Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the Service Mode.
4. Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the Service Mode.
3.5.2.
“Call for P/M Fuser Web” (Default: 240K)
1. Perform the P/M (Preventive Maintenance). Refer to Section 3.3 and 3.4.
2. Press the "FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)" and “3” keys simultaneously in that order
2. Press the "FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)" and “3” keys simultaneously in that order
to enter the Service Mode.
3. Enter the Copy Service Mode F5-73 (Fuser web) PM cycle and change to the desired value.
4. Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the Service Mode.
4. Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the Service Mode.
3.5.3.
“Call for P/M ADF” (Default: Not shown)
1. Perform the P/M (Preventive Maintenance). Refer to Section 3.3 and 3.4.
2. Press the "FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)" and “3” keys simultaneously in that order
2. Press the "FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)" and “3” keys simultaneously in that order
to enter the Service Mode.
3. Enter the Copy Service Mode F5-87 (ADF) PM cycle and change to the desired value.
4. Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the Service Mode.
4. Press “FUNCTION” and “C (CLEAR)” keys simultaneously to exit the Service Mode.
3.5.4.
U14 “Replace The Toner Waste Container”
A. Blinking Maintenance and Toner Waste Container Indicators
Upon detecting that the Toner Waste Container is full, the machine will complete the current job, and
stop operating.
A blinking Maintenance and Toner Waste Container Indicators will appear on the display.
To continue using the machine temporarily while waiting for the Service Technician, press
"FUNCTION" and "2" keys simultaneously (up to 5,000 copies max.).
stop operating.
A blinking Maintenance and Toner Waste Container Indicators will appear on the display.
To continue using the machine temporarily while waiting for the Service Technician, press
"FUNCTION" and "2" keys simultaneously (up to 5,000 copies max.).
B. Steady Maintenance and Toner Waste Container Indicators
Upon reaching the 5,000 copies, the machine stops and will not allow further operation until the
Toner Waste Container is replaced.
Replace the Toner Waste Container. Refer to Section 2.2.2.
Toner Waste Container is replaced.
Replace the Toner Waste Container. Refer to Section 2.2.2.
Click on the first or last page to see other DP-3510 service manuals if exist.