Read Panasonic DP-3510 / DP-4510 / DP-6010 / DP-3520 / DP-4520 / DP-6020 / DP-3530 / DP-4530 / DP-6030 Other Service Manuals online
Digital Imaging Systems
DP-3510/4510/6010
DP-3520/4520/6020
DP-3530/4530/6030
DP-3520/4520/6020
DP-3530/4530/6030
[ Version 5.1 ]
This service information is designed for experienced repair technicians only and is not intended for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
WARNING
2
The contents of this Parts Manual are subject to change without notice.
Published in Japan.
Published in Japan.
General Annotations
1. Panasonic Digital Document Company and other Panasonic Sales Companies reserve
the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing, availability, and text)
the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing, availability, and text)
2. Electrical parts supplied may include previously used components.
3.
Important Safety Notice
Components identified by a mark, have special characteristics important for safety.
When replacing any of these components, use only manufacturer’s specified parts.
When replacing any of these components, use only manufacturer’s specified parts.
4. In New Parts column, "N" indicates part is used only in DP-3530/4530/6030 models
(From April 2005 Production), "C" indicates part is used in previous models.
(From April 2005 Production), "C" indicates part is used in previous models.
5. In Remarks column, "PM" indicates “Preventive Maintenance Part".
6. In Remarks column, "RTL" indicates that the Retention Time is limited for this item. After
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependent on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependent on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
7. This “Unit" which includes other itemized parts is provided as “Limited Availability" for your
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
8. This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs).
Information regarding Lead-Free (PbF) solder;
Information regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a mark following
the PCB part numbers in a label on the PCB.
the PCB part numbers in a label on the PCB.
Caution:
Pb free solder has a higher melting point than standard solder; typically the melting
point is 50 - 70 F (30 - 40 C) higher. Please use a soldering iron with temperature
control and adjust it to 700 20 F (370 10 C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder splash
or damage to the PCB.
control and adjust it to 700 20 F (370 10 C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder splash
or damage to the PCB.
Pb free solder will tend to splash when heated too high (about 1100 F/600 C).
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
URL: http://www.senju-m.co.jp) is recommended when repairing PbF PCBs.
3
Precautions
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat and eventually
cause fire if left unattended over an extended period of time.
connector can draw a significant amount of current that can generate heat and eventually
cause fire if left unattended over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord is
required, always use a properly rated cord.
required, always use a properly rated cord.
120 V/15 A or AC 220 - 240V/10 A
If you use a cord with an unspecified current rating, the machine or plug may emit smoke or
become hot to the touch.
become hot to the touch.
Do not attempt to repair, pull, bend, chafe or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is damaged or insulated wires are exposed, contact the authorized
Panasonic dealer for a replacement. Using a damaged cord can cause fire or electric
Panasonic dealer for a replacement. Using a damaged cord can cause fire or electric
Stop operation immediately if your machine emits smoke, excessive heat, unusual noise, or
abnormal smell, or if water is spilt onto the machine. These conditions can cause fire.
Immediately switch Off and unplug the machine, and contact the authorized Panasonic
abnormal smell, or if water is spilt onto the machine. These conditions can cause fire.
Immediately switch Off and unplug the machine, and contact the authorized Panasonic
.
Do not disconnect or reconnect the machine while the power switch is in the On position.
Disconnecting a live connector can cause arcing, consequently deforming the plug and
cause fire.
Disconnecting a live connector can cause arcing, consequently deforming the plug and
cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cord
forcibly can damage it and cause fire or electric shock.
forcibly can damage it and cause fire or electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug it.
If an unused machine is left connected to a power source for a long period, degraded insulation
can cause electric shocks, current leakage or fire.
If an unused machine is left connected to a power source for a long period, degraded insulation
can cause electric shocks, current leakage or fire.
Be sure to switch Off and unplug the machine before accessing the interior of the machine
for cleaning, maintenance or fault clearance. Access to a live machine's interior can cause
electric shock.
for cleaning, maintenance or fault clearance. Access to a live machine's interior can cause
electric shock.
For Your Safety
To prevent severe injury and loss of life, read this section carefully before servicing the Panasonic
machine to ensure proper and safe operation of your machine.
machine to ensure proper and safe operation of your machine.
This section explains the Warnings and Cautions used in the machine and/or this manual.
WARNING:
Denotes a potential hazard that could result in serious injury or death.
CAUTION:
Denotes hazards that could result in minor injury or damage to the machine.
This section also explains the Warnings and Cautions used in the machine and/or this manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
that must be emphasized in order to operate the machine safely.
WARNING
Please ensure that the machine is installed near a wall outlet and is easily accessible.
shocks.
dealer.
4
Once a month, unplug the machine and check the power cord for the following. If you notice any unusual
condition, contact the authorized Panasonic dealer
condition, contact the authorized Panasonic dealer
.
The power cord is plugged firmly into the receptacle.
The plug is not excessively heated, rusted, or bent.
The plug and receptacle are free of dust.
The cord is not cracked or frayed.
The plug is not excessively heated, rusted, or bent.
The plug and receptacle are free of dust.
The cord is not cracked or frayed.
Operating Safeguards
Do not touch areas where these caution labels are attached to, the surface may be very hot and may cause
severe burns.
severe burns.
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt water can cause fire or
shock hazard.
shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get into the
machine, they can short-circuit internal components, and cause fire or electric shocks.
machine, they can short-circuit internal components, and cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine immediately.
Operating a debris-contaminated machine can cause fire or electric shock.
Operating a debris-contaminated machine can cause fire or electric shock.
Do not try to alter the machine configuration or modify any parts. An unauthorized modification can cause
smoke or fire.
smoke or fire.
Consumable Safeguards
Never dispose of toner, toner cartridge or a waste toner container into an open flame. Toner remaining in the
cartridge can cause an explosion, burns and/or injuries.
cartridge can cause an explosion, burns and/or injuries.
Keep button batteries/stamp out of the reach of children. If a button battery/stamp is swallowed accidentally,
get medical treatment immediately.
get medical treatment immediately.
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials such as curtains that
may catch fire.
may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment. Prolonged exposure to
these adverse conditions can cause fire or electric shocks.
these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can with stand.
If tilted, the machine may tip-over and cause injuries.
If tilted, the machine may tip-over and cause injuries.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine is moved with the
power cord attached, it can cause damage to the cord which could result in fire or electric shock.
power cord attached, it can cause damage to the cord which could result in fire or electric shock.
CAUTION
When relocating the machine, remove the toner and/or developer, and pack the machine with proper
packing materials for shipping.
packing materials for shipping.
