Read Panasonic DP-2310 / DP-3010 (serv.man4) Other Service Manuals online
100
DP-2310/3010
APR 2003
Ver. 1.00
026 Non-Standard
1 = Off (Invalid)
2 = On (Valid)
2 = On (Valid)
Selects own mode (Panafax mode).
027 Short Protocol B 1 = Off (Invalid)
2 = On (Valid)
Selects the short protocol mode.
028 Short Protocol D 1 = Off (Invalid)
2 = On (Valid)
Selects the short protocol mode. When activated, it
allows the machine to automatically store the
modem speed for each Auto Dial Number.
allows the machine to automatically store the
modem speed for each Auto Dial Number.
029 Remote
Diagnostics
1 = Off (will not accept)
2 = On (accepts)
2 = On (accepts)
Selects whether the machine accepts Remote
Diagnostics from the service station.
Diagnostics from the service station.
030 CED & 300 bps
1 = 75 ms
2 = 1 sec
2 = 1 sec
Selects the pause interval between the CED and the
300 bps signal.
(Used when Echo Suppression is disabled.)
300 bps signal.
(Used when Echo Suppression is disabled.)
031 RTC = EOL x 12 1 = Off (EOLx6)
2 = On (EOLx12)
Selects the RTC signal, EOLx6 or EOLx12.
032 V34 TX Start
2400-33600bps
Selects the transmission modem start speed for V.34
communication, 33600-2400 bps.
communication, 33600-2400 bps.
033 V34 RX Start
2400-33600bps
Selects the receiving modem start speed for V.34
communication, 33600-2400 bps.
communication, 33600-2400 bps.
034 V34 TX SR
2400-3429sr
Selects the transmission symbol rate for V.34, 3429/
3200/3000/2800/2400 sr.
3200/3000/2800/2400 sr.
Press “V” or “/\ “ to select the symbol rate.
035 V34 RX SR
2400-3429sr
Selects receiving symbol rate for V.34, 3429/3200/
3000/2800/2400 sr.
3000/2800/2400 sr.
Press “V” or “/\ “ to select the symbol rate.
036 Not Used
037 Protocol Display 1 = Off (not displayed)
2 = On (displayed)
Selects whether to display the modem speed during
communication.
(Press the Job Status Key to display)
communication.
(Press the Job Status Key to display)
038 Not Used
039 Flash Time
5 = 50 ms
~
100 = 1000 ms
~
100 = 1000 ms
Selects the pause interval before activating the Flash
key.
key.
040 Flash Time
(PSTN)
5 = 50 ms
~
100 = 1000 ms
~
100 = 1000 ms
Selects the pause interval before activating the Flash
key.
(For Germany, Austria and Czech)
key.
(For Germany, Austria and Czech)
041 Pause Time
1 = 1 sec.
~
10 = 10 sec.
~
10 = 10 sec.
Selects the pause interval from 1 sec. ~ 10 sec. for
dialing through a switchboard or for international
calls.
dialing through a switchboard or for international
calls.
042 Not Used
043 Redial Interval
0 = no waiting
~
15 = 15 minutes
~
15 = 15 minutes
Selects the redial interval from 0 to 15 minutes in 1
minute steps.
minute steps.
044 Redial Count
0 = no redial
~
15 = 15 times
~
15 = 15 times
0 ~ 9 (For Australia Only)
Selects the redial count from 0 to 15 times in 1 step
intervals.
Note:
intervals.
Note:
In order to comply with the requirements TBR21
in the EC countries, do not select 15 times.
in the EC countries, do not select 15 times.
045 Ring Detect
Count
1 = 1 ring
~
9 = 9 rings
~
9 = 9 rings
Selects the ring detection count from 1 to 9 rings in 1
ring step intervals.
ring step intervals.
Function Parameter Table
No.
Parameter
Selections
Function
Click on the first or last page to see other DP-2310 / DP-3010 (serv.man4) service manuals if exist.