DP-2310, DP-3010 (serv.man4) - Panasonic Copying Equipment Other Service Manuals (repair manual). Page 102

102

DP-2310/3010

APR 2003

Ver. 1.00

068 NYSE Fax 

Forward
(USA and 
Canada Only)

1 = Off
2 = On

Selects whether the machine will forward the 
incoming and outgoing faxes to a specified station.
Note:

Once this parameter is activated, Fax Forwarding 
via Fax Parameter 054 is automatically disabled, 
an Access Code of "0000" is automatically 
assigned and Fax Parameter 038 has a new 
setting added called "NYSE".

069 NYSE Local 

Print
(USA and 
Canada Only)

1 = Inc
2 = On (Always)

Selects the printing condition for the incoming faxes 
after FAX Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON

: Always prints.

070 Line Error

1 = 128 lines
2 = 256 lines
3 = 512 lines
4 = 1024 lines
5 = 2048 lines
6 = Off
      (will not disconnect line)

1. Selects the line disconnect condition during 

reception. If the number of line errors exceed this 
setting, the unit will disconnect the line.

2. Selects the transmit condition of RTP/PIP or RTN/

PIN. 
(Available if No.73 Error Detect is set to "LINES") 
(See Note 1)

071 Total Error

1 = 5%
2 = 10%
3 = 15%
4 = 20%

Selects the transmit condition of RTP/PIP or RTN/
PIN.
(Available if No.73 Error Detect is set to "RATE".)
(See Note 2)

072 Continuous Error 1 = Off (unlimited)

2 = 3 lines/STD
3 = 6 lines/STD
4 = 12 lines/STD

Selects the continuous total error criteria of Off/3/6 or 
12 lines in Standard mode.   If continuous total error 
exceeds this setting, the unit will transmit RTN/PIN. 
(Available if No.73 Error Detect is set to "RATE".)

073 Error Detect

1 = Lines
2 = Rate

Selects the error detect condition Lines/Rate.

074 RTN Receive

1 = Disconnect
2 = Continue

Selects whether to disconnect the phone line or 
continue when "RTN" is received.

075 Coding

1 = MH (MH only)
2 = MR (MH or MR)
3 = MMR
      (MH or MR or MMR)
4 = JBIG

Selects the coding scheme.

076 Batch TX

(USA and 
Canada Only)

1 = Off
2 = On

Selects whether the batch transmission is available.

077 RX JAM Length

1 = Off (unlimited)
2 = 2 m

Selects the maximum length of a received  
document that can be printed.

078

~ 

079

Not Used

080 Original Lead 

Edge ADF

-99
~
+99

Adjusts the distance between the scanning sensor 
ON position and the scanning start position.

081 Original Tail 

Edge ADF

-127
~
+127

Adjusts the distance between the scanning sensor 
OFF position and the scanning end position.

082 JAM Length

1 = 1 m
2 = 2 m

Selects the maximum length of the original that can 
be scanned.