Read Panasonic DP-2310 / DP-3010 (serv.man4) Other Service Manuals online
98
DP-2310/3010
APR 2003
Ver. 1.00
005 Destination
Code
000 : Austria
001 : U.K.
002 : Canada
003 : Denmark
004 : Taiwan
005 : Finland
006 : Germany
007 : Netherlands
008 : Italy
009 : Spanish
010 : Hong Kong
011 : Australia
012 : Switzerland
013 : Norway
015 : Portuguese
016 : Ireland
017 : Belgium
018 : Sweden
019 : Turkey
020 : U.S.A.
021 : France
022 : New Zealand
025 : Japan
030 : Czech
031 : Russia
032 : Greece
033 : Hungary
034 : Indonesia
035 : South Korea
038 : Malaysia
039 : China
045 : Thailand
048 : South Africa
049 : Singapore
050 : Universal
001 : U.K.
002 : Canada
003 : Denmark
004 : Taiwan
005 : Finland
006 : Germany
007 : Netherlands
008 : Italy
009 : Spanish
010 : Hong Kong
011 : Australia
012 : Switzerland
013 : Norway
015 : Portuguese
016 : Ireland
017 : Belgium
018 : Sweden
019 : Turkey
020 : U.S.A.
021 : France
022 : New Zealand
025 : Japan
030 : Czech
031 : Russia
032 : Greece
033 : Hungary
034 : Indonesia
035 : South Korea
038 : Malaysia
039 : China
045 : Thailand
048 : South Africa
049 : Singapore
050 : Universal
Sets the Destination Code after installing the Fax
Communication Board (DA-FG300).
Communication Board (DA-FG300).
Note:
It is not necessary to set the parameter for the
following suffix (Destinations). The Fax Firmware
is automatically loaded with the Host Firmware.
following suffix (Destinations). The Fax Firmware
is automatically loaded with the Host Firmware.
PB : UK
PF : France
PG : Switzerland
PK : China
PM : Germany
PT : Taiwan
PU : USA
PF : France
PG : Switzerland
PK : China
PM : Germany
PT : Taiwan
PU : USA
006 ID Display
1 = Number (Numeric ID)
2 = Chara (Character ID)
2 = Chara (Character ID)
Selects the priority of displaying the ID.
007 JRNL Column
1 = Station
2 = RCV’D ID
2 = RCV’D ID
Selects the contents of the ID to display on the
Journal.
Journal.
008 Monitor
1 = Off
2 = On
2 = On
Selects whether the Monitor is ON/OFF for
monitoring fax signals.
(FOR SERVICE USE ONLY)
monitoring fax signals.
(FOR SERVICE USE ONLY)
009 DC Loop
1 = Off (Normal)
2 = On (Off Hook)
2 = On (Off Hook)
Selects a false Off Hook state for back to back
communication test.
communication test.
010 TX Level
00 = 0 dBm
~
15 = -15 dBm
~
15 = -15 dBm
Selects the TX signal output level, 0 to -15 dBm in 1
dBm steps. (Refer to Chapter 4.3. of the Service
Manual)
dBm steps. (Refer to Chapter 4.3. of the Service
Manual)
011 RX Level
1 = -43 dBm
2 = -38 dBm
3 = -33 dBm
4 = -48 dBm
2 = -38 dBm
3 = -33 dBm
4 = -48 dBm
Selects the receiving sensitivity of -33/-38/-43/-48
dBm.
dBm.
Function Parameter Table
No.
Parameter
Selections
Function
Click on the first or last page to see other DP-2310 / DP-3010 (serv.man4) service manuals if exist.