• Service Manuals |
  • Panasonic |
  • PC |
  • FZ-A1BDAAXXM, FZ-A1BDAAEE9, FZ-A1BDAAZE9

FZ-A1BDAAXXM, FZ-A1BDAAEE9, FZ-A1BDAAZE9 - Panasonic PC Service Manual (repair manual). Page 42

Read Panasonic FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 Service Manual online

■ Attachment of LVDS Cable
■ Preparation of each component  ( → P7-6 " ■ Preparation of each component" )
■ Attachment of 5M Camera  ( → P7-7 " ■ Attachment of Main PCB and WWAN Module" )
■ Attachment of Protection Sheet ( → P7-8 " ■ How to Paste the Sheet, and connection of cables" )
■ Attachment of Support Bracket ( → P7-10 " ■ Attachment of DC PCB" )
■ Attachment of Camera Holder ( → P7-12 " ■ Attachment of RTC Battery" )
1. Remove release paper of the Thermal Pad, and then paste 
    at the L-shaped portion of the Main PCB metal part.
    
Note: Does not wrinkle of the Thermal pad.
2. Paste 1pcs Tape to the heatsink as shown in position.
3. Positioned in the upper-right corner of the L-shaped portion of 
    the Main PCB sheet metal parts, paste the 1pcs Tape as figure.
Position the heatsink  
according to this part.
Thermal Pad
Position the Tape 
according to this part.
Paste In this 
Double-sided Tape.
The cable must be 
small thread alignment 
fixture at the small arc.
Here the cable can not 
exceed a small groove.
Paste Tape
Paste Tape
4. Insert the LVDS Cable into the Main PCB connecter, and remove 
    the release paper, fix on the Lower Case / Speaker Ass'y.
    
Note:  Position the LVDS Cable using the gauge data as shown 
in the figure.
LVDS Cable
7-14
Page of 63
Display

Click on the first or last page to see other FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 service manuals if exist.

Random: