Read Panasonic FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 Service Manual online
7.1.7.
Media PCB Lower Case / Speaker Ass'y and LCD Module / Upper Case Ass'y instal-
lation
lation
1. Attach the Media PCB to the LCD Module / Upper Case Ass'y, and tighten 2 Screw<N6>.
Note:
Tighten the Screws in the numbered order (No.1 to No.2).
2. Connect the Media FPC, and paste the Cable Mylar 2.
3. Flip the Media FPC.
3. Flip the Media FPC.
4. Connect the Media FPC to 2 locations.
5. Paste the Cable Mylar 2 to 2 locations, and paste the Conductive Tape.
5. Paste the Cable Mylar 2 to 2 locations, and paste the Conductive Tape.
6. Apply grease on the orange-covered waterproof rubber of LCD unit.
( → P7-28 to P7-32 " ■ Grease Application Manual for Servicing" )
Screw<N6>:No.2
Screw<N6>:No.1
Media PCB
LCD Module / Upper Case Ass'y
Cable Mylar 2
Connector
Media FPC
Media FPC
Connector
Cable
Mylar 2
Cable Mylar 2
Conductive
Tape
7-17
Click on the first or last page to see other FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 service manuals if exist.