Read Panasonic FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 Service Manual online
7.1.5.
RTC Battery and Charger PCB installation
1. Attach the Charger PCB, and connect the Charger PCB Cable.
2. Attach the Charger Holder, and tighten 2 Screw<N2>.
3. Attach the RTC Battery.
4. Connect the Charger PCB Cable and RTC Battery, paste the Tape and Mylar Tape. (CHACN1, RTCN1)
2. Attach the Charger Holder, and tighten 2 Screw<N2>.
3. Attach the RTC Battery.
4. Connect the Charger PCB Cable and RTC Battery, paste the Tape and Mylar Tape. (CHACN1, RTCN1)
Note:
Tighten the Screws in the numbered order (No.1 to No.2).
Screw<N2> : DRHM0213ZA
■ Attachment of Charger PCB ( → P7-8 " ■ How to Paste the Sheet, and connection of cables" )
■ Processing of Cables ( → P7-9 " ■ Processing of various kinds cables" )
■ Processing of Cables ( → P7-9 " ■ Processing of various kinds cables" )
Tape
Screw<N2>:No.2
Screw<N2>:No.1
RTC Battery
Connector(CHACN1)
Connector(RTCN1)
Charger PCB Cable
Mylar Tape
Charger PCB
Charger Holder
7-11
Click on the first or last page to see other FZ-A1BDAAXXM / FZ-A1BDAAEE9 / FZ-A1BDAAZE9 service manuals if exist.